background image

4

If a grounding-type outlet is not available, an 
adapter, shown in Figure B, may be obtained 
so that a 2-slot wall outlet can be used with  
a 3-prong plug. As shown in Figure C, the 
adapter must be grounded by attaching its 
grounding lug under the screw of the outlet 
cover plate.

NOTE: Do not remove the grounding 
prong.
CAUTION: Before using an adapter, it must 
be determined that the outlet cover plate 
screw is properly grounded. If in doubt, 
consult a licensed electrician. Never use 
an adapter unless you are sure it is 
properly grounded.
Note: Use of an adapter is not permitted in 
Canada.

Important unpaCKIng 

InStruCtIonS 

  1. Place the box on a large, sturdy, flat 

surface.

  2. Remove the instruction book and any 

other literature.

  3. Turn the box so that the backside of the 

Brewer is down and slide the 
coffeemaker from the box.

  4. After the Brewer has been removed, 

place the box out of the way and take 
the packing materials.

  5. Remove the polybag covering the Brewer.
We suggest you save all packing materials in 
the event that future shipping of the machine 
is needed. Keep all plastic bags away from 
children.

Contents

Important Safeguards ................................2

Important Unpacking Instructions ..............4

The Quest for the Perfect Cup ..................5

Features and Benefits ................................6

Set-Up & First Brew ...................................8

Setting Up Your Brewer .............................8

Charcoal Water Filter .................................9

Brewing .................................................... 10

Hot Water/Rinse ....................................... 12

Brewing with the My K-Cup

®

 Accessory . 13

Stopping the Brew Process ..................... 14

Adding Water ........................................... 14

Purging the Brewer .................................. 14

Programming ........................................... 15

     Setting the Clock ................................ 15

     Programming On/Off Features ........... 15

     Programming Brew Temperature .......17

     Programming Your Brew Size ............ 18

Cleaning & Maintenance .......................... 18

     Cleaning External Parts ...................... 18

      Cleaning the My K-Cup

®

 Filter ............ 18

     Cleaning the K-Cup

®

 Holder ............... 19

     Cleaning the Water Reservoir and Lid 19

     De-Scaling Your Brewer .....................20

Troubleshooting ........................................ 21

Warranty ...................................................22

Summary of Contents for SS-780PC

























Reviews: