11
8
7
9
1
2
6
5
5
4
CONTENTS
Important Safeguards
................
2
Parts and Features
...................
4
Before First Use
....................
5
Assembly Instructions
................
5
Operating Instructions
................
6
Cleaning and Maintenance
............
6
Tips and Hints
......................
7
Troubleshooting
....................
9
Receipes
. . . . . . . . . . . . . . . . . . . . . . . . .
10
Warranty
.........................
1
7
PARTS AND FEATURES
1. Plastic
housing
2.
Carbonating activation lever
3.
Removable back cover
(not shown)
4. Quick-connect
system
(not shown)
5. Tilt
head
6. Beverage
stem
7.
1-liter beverage bottle
8.
Removable drip tray
9.
Beverage bottle cap
10. CO
² buzz indicator
(not shown)
11. Recyclable
CO
² cartridge
That makes up to 16L of carbonated
water
.
NOTE
: Y
our Sparkling Beverage
Maker works with all Cuisinart CO
2
cartridges.
12. Lock
switch
(not shown)
on back of unit.
13. BPA
free
(not shown)
All materials that come in contact
XJUI
GPPE
BOEPS
MJRVJE
BSF
#1"
GSFF
BEFORE FIRST USE
r
3FNPWF
BMM
QBDLBHJOH
NBUFSJBMT
BOE
BOZ
promotional labels or stickers from your
Sparkling Beverage Maker. Be sure all
parts (listed in Parts and Features) of your
new drink maker have been included
before discarding any packaging
materials.
r
:PV
NBZ
XBOU
UP
LFFQ
UIF
CPY
BOE
packing materials for use at a later date.
r
#FGPSF
VTJOH
ZPVS
$VJTJOBSU
4QBSLMJOH
Beverage Maker for the first time, remove
any dust from shipping by wiping the
housing with a damp cloth.
r
5IPSPVHIMZ
DMFBO
DBSCPOBUJOH
TUFN
BOE
beverage bottle.
r
"MM
SFNPWBCMF
QBSUT
DBO
CF
TVCNFSHFE
JO
water for cleaning.
r
/FWFS
QMBDF
UIF
VOJU
IPVTJOH
JO
UIF
dishwasher or immerse it in water.
Always use a damp cloth to wipe clean.
ASSEMBLY
INSTRUCTIONS
Assembling the Sparkling Beverage Maker
1.
Place base on a clean, flat surface
(see fig. a).
2.
Push up lock switch on back of unit and
remove the back cover
.
3.
Remove shrink-wrap seal and pr
otective
cap fr
om your r
ecyclable CO
2 cartridge.
4.
Insert your r
ecyclable CO
2 cartridge
into the back of the unit vertically so
that the cartridge r
ests comfortably in
the quick-connect holder ar
ea
(see fig. b).
NOTE
: Y
our Sparkling
Beverage Maker works with all Cuisinart
CO
2
cartridges.
5.
Pr
ess firmly down on the CO
2 locking
lever until the system snaps into place
(see fig. c).
6.
Pick up the r
emovable back cover with
the two pr
ongs facing down, and insert
them into the base of the unit. Push the
cover towar
d the unit to lock into place.
7.
Place the r
emovable drip tray in the
base of the unit.
8.
Fill your beverage bottle to the max fill line
using cold purified water or tap water
.
NOTE
: Cold water is r
ecommended as it
carbonates better and faster than r
oom
temperatur
e water
.
9.
Tilt beverage bottle under the
carbonating stem
(see fig. d)
and push
beverage bottle vertically into the tilt
head
(see fig. e).
10.
Rotate the bottle counter
-clockwise until
secur
ely in place.
Note:
Hand tighten
only
. Do not use tools.
Disassembling the Sparkling Beverage Maker
1.
Place base on a flat, clean surface.
2.
To
be sur
e the unit is not pr
essurized,
pull the beverage bottle (connected to
the tilt head) away fr
om the unit.
Note:
If unit is still under pr
essur
e you will
hear a “hiss” when tilting.
3.
Remove the beverage bottle by r
otating
it clockwise until it r
eleases fr
om the tilt
head.
4.
Remove the back cover by pushing up
the lock switch, and, holding the cover
by the sides, pull it of
f of the unit.
5.
Push the locking lever up and pull the
recyclable CO
2 cartridge towar
d you
to r
emove.
6.
Remove drip tray by placing fingers
in integrated finger slots, and pulling
it away fr
om unit.
fig. e
fig. d
fig. f
fig. a
fig. b
fig. c
