USE AND CARE
Always unplug the hand mixer from the
electrical outlet when not in use.
Instructions for First Time Use:
Remove the clear rectangular label that
covers the speed and time display
Window on the handle. Until the small
label is removed, you will not be able to
see the speed and time display.
Turning Hand Mixer On/Off:
Plug hand mixer into outlet. Press ON/OFF
switch to turn hand mixer ON. Hand mixer
will immediately begin to mix on Speed 1.
To turn hand mixer off, press ON/OFF
switch again. ON/OFF switch will pop up.
Operating the CountUp
®
Timer:
Just press the ON/OFF switch to turn the
hand mixer ON. The CountUp
®
timer starts
automatically when you start the hand mixer.
And it stops automatically when you press
the ON/OFF switch to turn the hand mixer
OFF. All you have to do is watch the timer
and read the time. The time will remain in
the time display window for 1-2 seconds
after you turn off the hand mixer.
Wait for the time display window to go blank
before turning the hand mixer on again.
Changing Speeds:
Select from 9 speed settings. Press the
button marked "+", located to the right, to
increase speed. Press the button marked
"-", located to the left, to decrease speed.
Allows you to change speeds quickly while
you are mixing. If you want to skip speeds,
just hold the button down and speeds will
change more quickly.
Inserting Super-Sized Beaters:
1. Unplug hand mixer and set the power
switch to the OFF position.
2. Insert beater with collar into larger
hole. Push beater in until it clicks into
place. Insert the beater with no collar
into smaller hole. Push beater in until
it clicks into place.
Inserting Professional Chef's Whisk:
1. Unplug hand mixer and set the power
switch to the OFF position.
(Up position, not depressed.)
2. Hold professional chef's whisk at
stem end, and insert into either hole.
Push whisk in until it clicks.
DO NOT PUSH WHISK IN FROM WIRE
END, AS YOU MAY DAMAGE WIRES.
Cleaning and Removing
Super-Sized Beaters and
Professional Chef's Whisk:
1. Before cleaning the SmartPower
CountUp
®
Hand Mixer, set the
power switch to OFF and unplug it
from the wall outlet. Pull up on the
beater release trigger and remove
the beaters or chef's whisk from the
hand mixer. Wash the beaters or
whisk after each use in hot soapy
water or in a dishwasher.
2. NEVER PUT THE MOTOR HOUSING IN
WATER OR OTHER LIQUID TO CLEAN.
Wipe it with a damp cloth or sponge.
Do not use abrasive cleansers, which
could scratch the surface.
5
Larger
Hole
Collar
02CU13047 HTM-9LB IB 6/30/03 3:58 PM Page 5
