9
Pick up the blade ring by its hub holding ribs (grips) and turn it
very slightly clockwise. This locks it in place on the plastic blade
sheath and prevents it from sliding up during processing.
3. Connect the Smart Stick
®
Hand Blender motor body to the top of
the chopper/grinder attachment cover. Align the spline in the
chopper/grinder cover’s drive shaft with the ribbed opening on
the underside of the motor body. When aligned properly, slide
the two pieces together until they mate. You will feel and hear a
slight click. It may be helpful to press the
rubber release button when sliding
these pieces together.
4. With the hand blender in place,
locate the chopper/grinder cover
and put it on top of the prep bowl.
4a. Be sure that the 3 ridges
(cover slots) at the top of the
prep bowl line up with the
3- knotches in the underside
of the chopper/grinder cover,
and that the cover is seated
all around the top of the
prep bowl.
4b. Rotate cover clockwise to
secure it to the prep bowl.
F
g
L
M
3.
Motor
Body Bottom and
Chopper/grinder
Cover Top view
Summary of Contents for Smart Stick CSB-77
Page 30: ...30 NOTES...
Page 31: ...31 NOTES...
