4
5
CHARGING
INSTRUCTIONS
To charge your Cuisinart
TM
Salt, Pepper
and Spice Mill for use:
1. Follow
assembly instructions
for the
Cuisinart
TM
Salt, Pepper and Spice Mill
and charging base on page 4 to properly
assemble for charging.
2. Grasp assembled
unit securely and
make sure it is facing
upright. The Salt,
Pepper and Spice
Mill is facing upright
when the Cuisinart
TM
logo on the front of
the unit is in proper
reading orientation
(easy to read and
horizontal.)
See fig.10.
3. Place the fully
assembled Salt,
Pepper and Spice
Mill in the charging
base so that the
recessed area on the
back of the unit
housing fits
comfortably with the
protrusion on the
charging base.
See fig.11.
4. Plug charging base
into a 120v power
outlet. Your unit is
now charging for
use.
NOTE:
Unit is
properly charging if
red LED illuminates
from charging base.
See fig.12.
OPERATION
INSTRUCTIONS
1. Place housing and all removable parts
on a clean, flat surface. Make sure that
all parts have been cleaned and dried
thoroughly and properly assembled
before use.
2. Attach grinding container(s) to the unit
housing with sea salt, peppercorns, or
desired dried spice.
NOTE:
It is best to
attach the grinding container from the
bottom while holding the unit upright.
3. Line up the arrow on the grinding
container with the arrow on the unit
housing.
NOTE:
Both arrows should face
each other. This will indicate the grinding
container and unit are properly aligned.
4. Gently push the grinding container
and unit housing together. The grinding
container will fit together comfortably
with the unit housing.
5. Twist the grinding container clockwise
so that the arrow on the unit housing
is now aligned with the lock symbol on
the grinding container.
NOTE:
The two
pieces will click together indicating
proper assembly.
6. To attach the second grinding container,
flip the unit housing over and repeat
operating instructions.
7. Press the On/Off button in the center
of the unit housing to begin grinding.
NOTE:
Only the bottom container will
yield any grinding results. Even though
the grinding container facing upward will
rotate, no grinding will actually take place.
For use with measuring cap:
To use the measuring cap on either grinding
container, grasp the measuring cap and
connect to grinding container by aligning the
grooves on the measuring cap with the ridges
in the grinding container. Press together until
the ridge of the measuring cap rests flat
against the grinding container.
NOTE:
The measuring cap can be used on either
container during operation only.
When not
in use, the measuring cap should remain in
the uppermost grinding container as the unit
housing will not fit into the charging base if
the measuring cap is on the lower container.
ADJUSTING
THE GRIND
To adjust the grind from
fine to coarse, use the
adjustment dial on the
underside of the mill.
Clockwise for a finer grind
and counterclockwise for
a coarser grind.
ASSEMBLY
To assemble your Cuisinart
TM
Salt,
Pepper and Spice Mill for use:
1. Place housing and all removable parts
on a clean, flat surface. Make sure that
all parts have been cleaned and dried
thoroughly before assembling.
2. Attach grinding
container(s) to the
unit housing.
NOTE:
It is best to attach the
grinding container
from the bottom
while holding the unit
upright.
See fig.1.
3. Line up the arrow
on the grinding
container with the
arrow on the unit
housing.
NOTE:
Both
arrows should face
each other. This will
indicate the grinding
container and unit
are properly aligned.
See fig.2.
4. Gently push the
grinding container
and unit housing
together. The grinding
container will fit
together comfortably
with the unit housing.
See fig.3.
5. Secure the grinding
container in place by
twisting the grinding
container clockwise
so that the arrow on
the unit housing is
now aligned with the
lock symbol on the
grinding container.
NOTE:
The two
pieces will click
together indicating
proper assembly.
See
fig.4.
6. To attach the second
grinding container,
flip the unit housing
over and repeat
assembly
instructions.
See fig.5.
7. Your Cuisinart
TM
Salt,
Pepper and Spice
Mill is now assembled.
See fig.6.
For use with
measuring cap:
1. To use the measuring
cap on either grinding
container, grasp the
measuring cap and
connect to grinding
container by aligning
the grooves on the
measuring cap with
the ridges in the
grinding container.
See fig.7.
2. Press together until the ridge of the
measuring cap rests flat against the
grinding container.
NOTE:
When not in
use, the measuring cap should remain
in the uppermost grinding container,
as the unit housing will not fit into the
charging base if the measuring cap is
on the lower container.
To assemble charging base for use:
1. Place housing, charging base and all
removable parts on a clean, flat surface.
Make sure that all parts have been
cleaned and dried
thoroughly before
assembling.
2. Place the removable
spice catcher into the
charging base so
that it fits securely.
NOTE:
The spice
catcher will only fit
into the charging
base one way.
See fig.8.
3. Connect power
adapter to the charg-
ing base by grasping
the pin on the power
adapter and inserting
it vertically into the back of the charging
base until secure.
NOTE:
Do not insert
power adapter into the charging base
while power adapter is plugged into a
power source.
See fig.9.
fig.1
fig.6
fig.8
fig.10
fig.11
fig.
12
fig.7
fig.
9
fig.2
fig.3
fig.4
fig.5
