To program the Auto On:
Press and hold the AUTO ON button for
2 seconds. The digital display will flash the
default (12:00) or previously selected time
and the AUTO ON button will flash. Follow directions
under SETTING THE TIME (#1) to program your
start-brew time. Five seconds after finishing, the unit
will automatically exit Auto On Setup mode. AUTO ON
will appear on the control panel and the AUTO ON
button will illuminate, indicating AUTO ON is activated.
NOTE:
To exit Auto On Setup mode, you can also just
press AUTO ON
button again.
2.
4.
To start the brew cycle at the same time
the next day, simply press the AUTO ON
button and release. Auto On will appear
on the control panel and AUTO ON button
will be illuminated.
3.
At the programmed time, BREW/OFF will
illuminate, indicating that the brew cycle
is starting. AUTO ON will disappear from
the LCD and the AUTO ON button will no
longer be illuminated.
5.
To program the Auto Off:
Press the
MENU button 3 times to get to the AUTO OFF
Menu option. The digital display will flash the
programmed Auto Off default (0:30) or
previously selected time. Follow directions under
SETTING THE TIME to program coffee brewer to shut
off from 0 to 2 hours after brew cycle is finished.
To exit/confirm Auto Off time setting: Auto Off Setup
mode will be exited automatically after 5 seconds.
To set the time:
Plug in unit; 12:00
will flash in display for 30 seconds. If it
stops flashing, press MENU button 4 times
to return to CLOCK option. Press up
p
button to set hour and
q
button to set minutes. Be
sure PM indicator is on if desired. Press MENU to set
selected time or, after 5 seconds, unit will exit Clock
Setting mode.
1.
PROGRAMMING
QUICK REFERENCE GUIDE
PurePrecision
™
Pour-Over
Coffee Brewer
Please see reverse side for setup and use instructions.
