Cuisinart Grind & Brew DGB-300, User Manual

Page: 8 / 16

10. Flavor System Settings
Provide guidelines for optimum flavor extraction,
based on number of cups being brewed.
11. Filter Basket Cover/Filter Holder
To put on or remove, grasp cover in area
indicated by arrows.
NOTE: COVER MUST BE
IN PLACE FOR UNIT TO OPERATE. Warning:
This lid becomes hot after coffee has been
brewed.
Use caution when removing the lid.
Filter holder has a self-centering ring to keep
paper filters in the proper location. Note: This
piece is intentionally fitted loosely to the filter lid.
12. Grinder Basket Lid
Use the recess on each side of the lid to remove
lid and add beans easily.
Note: Lid must be in
place for unit to operate.
13. Grinder/Filter Basket
This is a one piece basket which holds the
permanent or paper filter on one side, and the
whole bean grinder on the other side.
NOTE:
FILTER BASKET MUST BE IN PLACE FOR
UNIT TO OPERATE.
A note about filters:
When using a permanent
filter like the Cuisinart ® gold-tone filter, be sure
that the handle is positioned away from the
grinder basket. If not, the handle may interfere
with the flow of coffee into the filter basket.
Also note: using a permanent or gold-tone
filter will allow some fine coffee grounds to
fall into the coffee carafe. This will appear
as sediment in the carafe.
14. Finger Grips
Use these and the handle to easily lift the
grinder/filter basket out for cleaning.
15. Handle
Use this and the finger grips to easily lift the
grinder/filter basket out for cleaning.
16. Steam Safety Valve
Do not touch this valve.
Doing so may release
steam or hot water and cause personal injury.
The valve is designed to keep steam away from
exposed areas.
17. Steam Collector
Prevents steam from escaping from unit. Unplug
cord from outlet and allow unit to cool before
cleaning. To clean: remove by lifting up and out.
Run under warm water. To replace: place hooks
on locating notches.
18. Water Reservoir
8
10
11
12
14
13
15
16
17 18
02CU13488 DGB300 IB 6/23/03 2:31 PM Page 8