PROGRAMMING YOUR
COFFEEMAKER
SETTING THE CLOCK
When the coffeemaker is plugged in, 12:00
will flash in the display, indicating the unit is
in Clock Set mode. If the 12:00 stops
flashing, simply press and hold the Hour or
Minute button to return to flashing Clock
Set mode.
Entering Time Set Mode
Hold down the Hour or Minute button
until the clock begins flashing. Press
either button to select the desired time.
Hold buttons down to scroll through
the digits, or press and release to
advance one digit at a time. When
scrolling, the numbers will advance
slowly and then speed up. When the
number displayed approaches the
desired time, press and release to
advance one digit at a time. Be sure
the PM indicator is on if a PM time is
desired.
Exiting Time Set Mode
a. Press any function button besides
ON/OFF, Hour or Minute to exit mode
and activate the selected function.
b. If you do nothing for 5 seconds, the
mode will be exited.
SETTING THE PROGRAM TIME
1.
Press the ON/OFF button to turn on
the coffeemaker. The white LED will
illuminate.
2.
E
ntering Set Program Time Mode
Press the Program button once. The
Auto ON icon and the previously
selected auto-on time, or the default
time (12:00) will appear. Press and
hold the Program button until the
time begins to flash. You are now in
Set Program Time mode. Set the time
you want coffee to begin brewing by
pressing the Hour and Minute
buttons. Five seconds after finishing,
the unit will automatically exit Auto
ON setup mode and the Auto ON
icon will remain on the LCD, letting
you know Auto ON is activated. The
coffeemaker will start to brew at the
programmed time. The Program
mode cannot be entered if the
coffeemaker is in its brew cycle.
3.
To Activate Auto ON Using Previously
Selected Time
Press the program button once. The
Auto ON icon and previously set time
will appear. After 5 seconds, the
clock will return to the time of day
and the Auto ON icon will remain on
the display
NOTE:
When Auto ON is activated, the
indicator will remain visible on the
LCD when the coffeemaker is in
standby mode.
4.
To Deactivate Auto ON
Press and release the Program button
until the Auto ON icon is no longer
displayed on the screen.
7
Summary of Contents for DGB-800C Series
Page 15: ...15 NOTES ...
