7
PROGRAMMING YOUR
COFFEEMAKER
SETTING THE CLOCK
When the coffeemaker is plugged in,
12:00 will flash in the display, indicating
the unit is in Clock Set mode. If the 12:00
stops flashing, simply press and hold the
Hour or Minute button to return to flashing
Clock Set mode.
Entering Time Set Mode
Hold down the Hour or Minute button
until the clock begins flashing. Press
either button to select the desired
time. Hold buttons down to scroll
through the digits, or press and
release to advance one digit at a time.
When scrolling, the numbers will
advance slowly and then speed up.
When the number displayed
approaches the desired time, press
and release to advance one digit at a
time. Be sure the PM indicator is on if
a PM time is desired.
Exiting Time Set Mode
a. Press any function button besides
ON/OFF, Hour or Minute to exit mode
and activate the selected function.
b. If you do nothing for 5 seconds, the
mode will be exited.
SETTING THE PROGRAM TIME
1.
Press the ON/OFF button to turn on the
coffeemaker. The white LED will
illuminate.
2. E
ntering Set Program Time Mode
Press the Program button once. The
Auto ON icon and the previously
selected auto-on time, or the default
time (12:00) will appear. Press and hold
the Program button until the time begins
to flash. You are now in Set Program
Time mode. Set the time you want
coffee to begin brewing by pressing the
Hour and Minute buttons. Five seconds
after finishing, the unit will automatically
exit Auto ON setup mode and the Auto
ON icon will remain on the LCD, letting
you know Auto ON is activated. The
coffeemaker will start to brew at the
programmed time. The Program mode
cannot be entered if the coffeemaker is
in its brew cycle.
3.
To Activate Auto ON Using Previously
Selected Time
Press the program button once. The
Auto ON icon and previously set time will
appear. After 5 seconds, the clock will
return to the time of day and the Auto
ON icon will remain on the display
NOTE:
When Auto ON is activated, the
indicator will remain visible on the
LCD when the coffeemaker is in
standby mode.
4.
To Deactivate Auto ON
Press and release the Program button
until the Auto ON icon is no longer
displayed on the screen.
Summary of Contents for DGB-800 Series
Page 15: ...15 NOTES ...
