be restarted by pressing the “On” button.
Restarting the process will not affect cof-
fee results. If you do not want the grinder to
come on again, press the “Grind Off” button
before pressing the “On” button. Once the lid
is closed, the beeping will stop, and the grind
and brew process will start again from the
beginning.
5. Before Brewing Coffee
Remove thermal carafe lid by turning in the
direction of the “unlock” arrow.
preWArm
CArAfe BY rInSInG IT ouT WITH HoT
WATer.
preWArmInG THe CArAfe WILL
HeLp Keep THe Coffee HoTTer.
Return the carafe lid to the carafe. To lock the
lid, turn in the direction of the “lock” arrow
until it fits tightly on carafe and arrow lines up
in the centre of the pour spout. This ensures
lid is closed and in the proper position for
brewing and pouring.
Make sure you have replaced the thermal
carafe in its position on the resting plate
and have placed a filter in the filter basket.
Plug the cord into an electrical outlet. “12:00”
will appear until you set the time. This will not
interfere with the operation of the coffeemaker.
To set clock, see the “Programming Your
Coffeemaker” section, page 8.
6. power unit
a) Immediate grinding and brewing:
Press the ON button. The indicator will
light and the process will begin.
b) Programmed Brewing:
Press the “Program” button. The indicator
will light and the display will show the pro-
grammed time for as long as the button is
depressed. The display reverts back to time
of day once the button is released. To set the
programmed time, see “Programming Your
Coffeemaker” on page 8.
7. Select Cups Setting
The 1-4 cup setting button is used when
you make small amounts of coffee. Normal
coffeemakers will produce a colder batch
of coffee when smaller amounts are made,
because the heater doesn't have enough time
to properly ‘warm up’ to heat a small amount.
The 1-4 setting basically ‘double heats’ the
water, making your smaller amount as piping
hot as a full pot would be.
To use:
When making a smaller amount,
press the 1-4 button on the control panel
after turning on the unit. The indicator light will
illuminate. Note that the 1-4 button can be set
at any time.
8. During and After Brewing
The Brew Pause feature allows you to remove
the carafe during mid-brew. The brewing pro-
cess does not stop during this period; only
the flow of coffee from the basket stops.
Do
not remove the carafe for longer than 30
seconds or the coffee may overflow the
basket.
While we offer this feature, we do not
recommend that you pour coffee before the
cycle has reached completion, since the cof-
fee brewed at the beginning of the cycle has a
flavour profile which is very different from the
coffee made at the end of the cycle. Removing
a cup during the brewing cycle will alter the
flavour of the finished pot.
Once the coffee has finished brewing, stir
it before serving to blend the flavours. The
coffee at the bottom of the carafe will be
somewhat stronger than the coffee at the top.
When the brewing cycle has been completed,
five beeps will sound. Coffee will continue
to stream from the filter for several seconds.
After brewing, the unit will automatically shut
itself off. The thermal carafe will keep the
coffee hot for hours.
Bottom of Thermal Carafe is hot to touch
for several minutes after brewing.
use caution.
The brew-through, pour-through lid allows
coffee to drip from coffeemaker through the
closed lid. When brewing is complete, the
lid seals itself so air stays out and coffee
freshness and temperature are preserved. No
need to turn or adjust the lid before pouring.
10
