7
programmIng Your
CoffeemaKer
to BreW Coffee
1. Turn the Function knob to Brew position.
2. Lift the Power switch to the on position
and release. The red on indicator light will
illuminate and the brew cycle will begin.
to turn tHe
CoffeemaKer off
Simply flip the Power switch to the off
position and release.
SettIng tHe CLoCK
When the coffeemaker is plugged in,
12:00 will appear.
turn the function knob to Clock.
Hold down the Hour or Minute button until
the clock begins flashing. Press either but-
ton to select the desired time. Hold buttons
down to scroll through the digits, or press
and release to advance one digit at a time.
When scrolling, the numbers will advance
slowly and then speed up. When the num-
ber displayed approaches the desired time,
press and release to advance one digit at a
time. Be sure the PM indicator is on if a PM
time is desired.
To finish setting the clock, turn the Function
knob to any other setting or simply wait
until the numbers stop blinking.
SettIng tHe auto on tIme
When you turn the Function knob to PRoG,
it displays a previously selected auto on time,
or the default time (12:00pm).
1. turn the function knob to prog.
Use the Hour and Minute buttons as
above to program your start-brew time.
2. turn the function knob to auto on.
LCD will display the current time.
3. flip the power switch to the on
position.
A green light indicates that the
Programming function is in use. At the
programmed time, the red light will come
on as well, indicating that the brew cycle
is starting. Both lights will turn off when
Keep Warm cycle ends.
note:
To reactivate the Auto on feature
to start brew cycle at the same time on
another day, simply flip the Power switch
to the oN position and release. The green
Auto on light will turn on.
1–4 Cup SettIng
The 1–4 cup setting basically double-heats the
water, making your smaller amount piping hot.
to use:
When making a smaller amount,
press the 1–4 button on the control panel after
turning on the unit.
Before fIrSt uSe
We recommend flushing out your
coffeemaker before first use.
Fill the reservoir with cold water and follow
the directions for Brewing Coffee.
Do not
aDD Coffee!
once the system flush is complete, your
coffeemaker is ready to brew so you can
enjoy Cuisinart at its best!
