3
Assembly
1 . Place the protective cover onto the stainless steel shaft . Screw the
handle clockwise onto the stainless steel shaft to tighten .
2 . Insert the shaft into the hole of the protective cover .
3 . Screw the food holder to the bottom of the stainless steel shaft so that the
teeth are pointed downward .
4 . Set the cutting surface on the collection bowl (as shown in diagram) and
turn clockwise to lock into collection bowl .
Handle knob
Stainless steel shaft
Center pin
Ribbon blade dial
Collection bowl
Julienne blade dial
Food holder
Handle
Protective cover
Cutting surface
