background image

4

PARTS & FEATURES

A. Food Pusher 

Assists to push ingredients into the food chute.

B. Hopper Cap 

Lifts for inserting whole foods into the 

feed chute such as apples and beetroot.

C. Plate Hopper 

Place whole foods onto the hopper plate 

to be directed into the food chute.

D. Feed Chute 

Channels ingredients to be juiced.

E. Juice Bowl Cover
F. Auger 

Slowly rotates to crush and press fruits, 

vegetables and nuts. 

G. Juice Strainer 1 

In combination with juice strainer 2, 

removes pulp for a smooth texture. 

H. Juice Strainer 2 

In combination with juice strainer 1, 

removes pulp for a smooth texture.

I.  Juicing Bowl 

Fresh juice is extracted into the juicing bowl 

before flowing into the juice jug.

J.  Pulp Spout 

Dry pulp is ejected through the pulp spout 

into the Juice Spout with Smart Cap, pulp 

container placed underneath. 

K. Juice Spout with Smart Cap 

Juice flows into the juice jug when the 

smart cap is open. Close the smart cap to 

close the flow into the juice jug.  

 

Note

: The black smart cap is located with 

the parts and needs to be assembled.

L.  On / Stop / Reverse Switch (REV)
M.   Motor Base
N. Juice Jug 

Collects up to 1L of fresh juice.

O. Pulp Container 

Holds approx 1kg of dry pulp.

P. Cleaning Brush - not shown

N

O

A

B

C

D

E

F

G

H

I

J

M

K

L

Summary of Contents for CSJ-300XA














Reviews: