4
1
Warning
:
Before connecting, be sure that there is no debris caught in the head of the LP gas
cylinder head of the regulator valve or in the head of the burner and burner ports.
Check for leaks after connecting the gas cylinder every time according to the “Checking for Leaks”
section on page 15.
Close the gas cylinder lid when burner is in operation.
ASSEMBLY INSTRUCTIONS
STEP 10
-------------------------------------------
Install the tank
Open the door and pull out the Tank Holder. Place a 20lb. propane gas tank (not included)
into the tank holder.
STEP 11
-------------------------------------------
Connect the tank
Connect Hose and Regulator Assembly to 20lb. LP-Gas
cylinder (sold separately).
Line up threads with those on regulator and rotate
clockwise until tight by HAND ONLY. DO NOT USE ANY
HAND TOOLS TO MAKE THIS CONNECTION.
Be careful not to cross threads when screwing in fitting.
To disconnect the LP-Gas cylinder, first make sure the
cylinder valve is OFF. Then, turn the knob regulator
counter-clockwise until it is loose.
