QUICK SETUP GUIDE: PART 2
5.
Place upper tank
onto lower tank
and cover with lid.
Place assembled
tanks on base with
vertical groove on
upper tank facing
the back of the unit.
6.
Flip lid open and
add
cold
water
to FILL line.
Continue adding
to the FILL line
until upper and
lower tanks are
completely full.
This may take
30 – 40 minutes.
7.
Place a glass under
right spigot and
press and hold COLD
button until water
flow is steady.
Repeat for ROOM.
This may take a
couple of minutes
per button.
8.
Flip lid open
and refill upper
tank with
cold
water to FILL
line. Continue
adding to the
FILL line until
upper and
lower tanks are
completely full.
PG-24576
10.
Refer to
Instruction
Booklet for
Operating
Instructions.
9.
Peel sticker off
filter timer and
press and hold
START button
until “Filtering”
is displayed.
Filtering
WATER DISPENSER SETUP
