Cuisinart CJK429 Series, Manual

Page: 6 / 16

6
supply cord damage, discontinue use immediately. If the supply cord is
damaged it must be replaced by the manufacturer. Return the appliance
to the Customer Care Centre (refer to ‘UK After Sales Service’ section
for further information). No repair must be attempted by the consumer.
n
Take care not to allow the appliance surfaces to come into contact with
other heat sensitive surfaces.
n
Before first use we recommend operating the kettle 2 or 3 times to
remove and dust or residue remaining from its manufacture.
n Always unplug the appliance from the mains outlet and allow to cool
before cleaning.
n Do not exceed the maximum fill level as clearly marked on the water
level indicator. If the kettle is overfilled, boiling water may be ejected.
n Ensure to regularly descale the appliance.
ELECTRICAL SAFETY
n Always ensure the voltage to be used corresponds with the voltage on
the appliance; this is indicated on the bottom of the kettle and the
power base.
n The appliance is not intended to be operated by means of external timer
or separate remote control system.
n Always disconnect the appliance from the electric supply if it is left
unattended.
n Never pull the plug out of the mains socket by the supply cord.
n Always ensure that your hands are dry before touching the supply cord
or removing the plug from the mains socket.
n Do not wrap the supply cord around the main body of the appliance
during or after use.
GENERAL SAFETY
n
Ensure all packaging materials and any promotional labels or stickers are
removed from the kettle before first use.
n
Always inspect the appliance before use for noticeable signs of damage.
Do not use if damaged, or if the appliance has been dropped. In the event
of damage, or if the appliance develops a fault, contact the Cuisinart
Customer Care Line (refer to “UK After Sales Service section” for further
information).