16
9. Warranty
This warranty covers defects in parts and workmanship for
a period of 12 months from the original purchase date. Any
damage claim regarding the enameling must be submitted
within 30 days of purchase to be covered by the warranty.
The following conditions are NOT covered by this warranty:
• Unevenness and color variations in the enamel coating
• Damage caused by improper assembly or disregard of
the manual.
• Use of spare parts not supplied by manufacturer.
• Damage resulting from modifications or inappropriate
use.
• Abuse of the grill
• Damage caused by improper maintenance or repairs by
an unauthorized person.
LIMITATIONS AND EXCLUSIONS:
1. This warranty applies only to the original purchaser and
may not be transferred.
2. If you can not verify the purchase date of the grill the
warranty period will begin on the date the grill was
manufactured.
3. Replacement or repair parts are warranted for the re-
maining period of the original part warranty.
YOUR OBLIGATIONS:
This grill must be assembled, installed, operated and main-
tained in accordance with all applicable codes and the
instruction manual furnished with this grill. You must keep
an invoice, cancelled check or payment record to verify the
purchase date of the grill.
For troubleshooting, FAQs or Customer Service, please visit us at www.cuisinartgrilling.
com or contact us at 1-866-994-6390.
To order replacement grill parts or other Cuisinart Grilling products, please visit us at
www.cuisinartgrilling.com or call 1-800-211-9604
Model #CGG-240
North American Distributor:
The Fulham Group
Newton, MA. 02460
BURNER WON’T LIGHT (USING 20LB. TANK WITH CONVERSION HOSE)
• Review all steps in LP bottle section above
• Ensure that LP tank supply valve is open (turned counterclockwise until stop)
• Ensure that the orifices at both ends of the conversion hose are not obstructed or damaged.
• Straighten sharp kinks in conversion hose
GRILL DOESN’T REACH HIGH ENOUGH TEMPERATURE (USING LP BOTTLE)
• Be sure LP bottle still has fuel in it by gently shaking it - there will be sounds of liquid inside if fuel remains.
• Check to see that the venturi tube air inlet screen is not covered or clogged (see users manual).
• Test gas system for leaks (see users manual)
GRILL DOESN’T REACH HIGH ENOUGH TEMPERATURE (USING 20LB LP TANK WITH CONVERSION HOSE)
Your LP tank has a safety device that is intended to reduce gas flow in the event of a leak. When this device is active, it is
commonly called “bypass”. This device can be inadertantly activated by not following proper lighting procedures. Should
you experience low flame, you should do the following:
1) shut off grill
2) close tank valve fully
3) remove conversion hose to relieve pressure, then re-attach
Then, restart the grill (and start the grill each time) using the proper procedure:
1) ensure the grill fuel knob is turned to OFF
2) slowly open the gas tank valve fully. Turn tank knob about 1/4 turn every 10 seconds
3) WAIT 5 SECONDS
4) follow the grill lighting steps (printed on grill, and in owner’s manual)
