Lift handle to lock
basket in raised position.
Slide release switch to
lower into oil.
4
5
Breakaway Cord and polarized plug
This appliance features a breakaway cord and polarized plug (one
blade is wider than the other). The breakaway cord is designed to
quickly disconnect from the appliance when a
pulling force is applied. Note: The breakaway
cord can fit into the appliance in only one
direction. Please refer to printing on plug that
states “This Side Up”. To reduce the risk of
electric shock, a polarized plug is provided. This
plug is intended to fit into a polarized outlet only.
If the plug does not fit into the outlet, reverse the
plug. If it still does not fit, contact a qualified
electrician. Do not attempt to modify the plug in
any way.
SHORT CORD INSTRUCTIONS
CaUTION:
A short power supply cord is provided to reduce the risk of
personal injury resulting from being entangled in or tripping over a
long cord.
EXTENSION CORD USE
An extension cord or longer detachable cord is not recommended for
use with deep-fat fryers.
ELECTRIC pOWER
If the electrical circuit is overloaded with other appliances, your
appliance may not operate. It should be operated on an electrical
circuit that is free from other appliances. If you are not sure of the
reason for overloading or cannot find a separate circuit, contact a
qualified electrician.
HOW TO USE yOUR
CUISINaRT
Tm
COOL TOUCH
DEEp FRyER
1. This appliance is designed for
household use only. It is not intended
for commercial use.
2. Before the deep fryer is used for the first time, remove all packaging
materials and follow cleaning instructions in this book.
3. Push lid release button to open lid.
4. Lift handle on frying basket up until it locks into place and remove
from oil container.
5. Pour approximately 3⁄4 gallon (3 L) of good quality vegetable, corn,
canola, soybean, or peanut oil into reservoir until it reaches between
the “Min” and “Max” marks inside container. DO NOT OVER-OR
UNDER-FILL.
6. Close lid on deep fryer.
7. Attach breakaway cord to the back of the appliance, then plug into
outlet.
8. Turn On the Cuisinart
TM
Cool Touch Deep Fryer by pushing the black
rocker switch up.
9. Set the temperature control knob to the desired temperature. The oil
“Ready” light will turn green once the oil has reached the desired
temperature.
10. When the “Ready” light illuminates, open lid and place basket with
handle locked in the upward position, into the
basket resting area. Place food into the basket
and close the lid. Lower basket into oil by
sliding the basket release switch on the basket
handle. Note: Do not exceed max fill line on
frying basket.
11. Set timer (0 to 30 minutes) to cooking time
specified, depending on the recipe. Timer will
ring when food is ready.
WaRNING:
The timer
does not switch appliance off.
NOTE: The timer will not buzz if set for 3 minutes or less. For
recipes that call for a cooking time of 3 minutes or less, turn the
mechanical timer to 5 minutes then return it to the required time
and the timer will buzz.
12. Lift handle to raise the basket and look through viewing window to
see if the food has reached the desired golden colour. If the food is
done, leave basket in locked position and allow oil to drain 10 to 20
seconds.
13. Open lid, remove basket, and place cooked food onto absorbent
paper towels.
CaUTION:
Beware of hot steam when opening lid.
NOTE:
To preserve oil quality, do not add salt or spices to the food
until after it has been removed from the fryer.
14. When cooking is finished, shut down fryer by switching power off.
15. Unplug the breakaway cord from the wall outlet before detaching
from the appliance.
CLEaNING INSTRUCTIONS
1. Always unplug appliance, detach the breakaway cord and let the oil
cool down to room temperature before cleaning.
2. Open the lid and remove it by pulling it upward.
3. Lift basket handle up until it locks into place and remove basket
from fryer.
4. Frying basket should be hand washed before first use and should
be seasoned in oil before going into the dishwasher for the first
time.
5. Remove control panel/heating element by pinching ridged outer
area of the basket rest and lifting upward.
6. The control panel should never be immersed in water or other
liquids. Clean the outer surface of the heating element with a damp
cloth containing mild soap solution or plain water.
7. Carefully remove oil container from housing and pour used oil into
suitable container.
WaRNING:
Use care – under edge of oil
container is sharp.
8. The lid and oil container are dishwasher-safe. Dry all parts
thoroughly after cleaning.
9. The remaining housing should be washed by hand with warm soapy
water. DO NOT SUBMERGE IN WATER.
10. Ensure that both the lid and the oil container are completely dry
after washing and before use.
11. After cleaning, reassemble oil container, control panel/ heating
element, basket and lid into deep fryer housing. The control panel/
heating element must be attached properly to the front of the
housing or appliance will not operate.
12.
TIp:
For ease in cleaning, wipe control panel with damp microfiber
cloth. Microfiber cloths are available in most kitchenware stores.
SaFETy FEaTURES
The Cuisinart
TM
Cool Touch Deep Fryer is equipped with the following
features to ensure safety:
• Safety Interlock – The control panel/heating element must be
properly attached to the front of the body or deep fryer will not
operate.
• Breakaway Cord – The cord is designed to quickly disconnect from
the appliance when a pulling force is applied.
• Thermostat Overload Protection – Your Cuisinart
TM
Cool Touch Deep
Fryer is equipped with a thermostat overload protection. If the unit
heats up beyond the recommended temperature level, the deep
fryer will automatically turn off. To reset, unplug
the unit from the wall outlet and allow it to cool
down. Remove the control panel and heating
element from the unit.
CaUTION:
Heating
element is extremely hot. Allow it to cool
thoroughly before removing it. You will find a
reset button on the back of the control panel to
the right of the heating rod. Using a toothpick or
another long, thin object, push the reset button
and properly place the control panel back into
position.
NOTE:
The unit will not work if the
control panel is not properly mounted. Plug the
unit back in, turn on and continue use. If the unit
still does not operate, repeat the steps above or call our Service
Centre for assistance.
