1
cloth and dry before storing. Wipe heating plate
with a clean, damp cloth. Never use rough,
abrasive materials or cleansers to clean the
resting plate. Do not dry the inside of the water
reservoir with a cloth, as lint may remain.
DECALCIFICATION
Decalcification refers to removing the calcium
deposits which form over time on the metal
parts of the coffeemaker.
For best performance from your coffeemaker,
decalcify the base unit from time to time. The
frequency depends upon the hardness of your
tap water and how often you use the
coffeemaker.
To clean, fill the water reservoir to capacity
with a mixture of
1
⁄³ of white vinegar and ²⁄³
water. Press the Grind Off button, and turn
the coffeemaker on by pressing the On button.
One cycle should be sufficient to adequately
clean the coffeemaker. When the cycle is
completed and the five beeps sound, turn
coffeemaker off. Repeat operation, this time
using fresh cold water.
TROUBLESHOOTING
proBLem
CAuSe
SoLuTIon
Continuous
beeping
Hopper not locked in place
(when brewing with whole
beans)
• Check to see if the hopper container release knob is in the unlocked
position
• Place the hopper container on the unit
• Turn the knob to the locked position
• Press On/Off or Program again to resume
Filter door not closed
• Check to be sure that all components of the filter compartment are in place
• Close filter door (you will hear a click if the door is properly shut)
• Press On/Off or Program again to resume
Filter basket not in place
• Open filter door by pressing the filter door release button
• Hook filter basket with cover onto door
• Close filter door (you will hear a click if the door is properly shut)
• Press On/Off or Program again to resume
Filter basket cover not in
place
• Open filter door by pressing the filter door release button
• Put on cover, matching “grind” arrows
• Hook filter basket with cover onto door
• Close filter door (you will hear a click if the door is properly shut)
• Press On/Off or Program again to resume
Filter Basket not emptied of
used grinds
• Open filter door by pressing the filter door release button
• Remove filter basket with cover
• Discard used grounds
• Replace filter basket with cover and close door
• Press On/Off or Program again to resume
Coffee is
weaker than
usual
Coffee chute is clogged
• Remove the hopper from the unit
• Lift coffee channel cover
• Clean out coffee chute
• Replace channel cover and hopper
• Your coffeemaker is now ready to brew again
Not enough beans in hopper
• Be sure there are enough beans in your hopper for the amount of coffee you
intend to brew
Strength setting is incorrect
• Check your strength setting — displayed on the LCD screen
• To change your strength settings press the strength control button
