7
PROGRAMMING A
CUSTOM SETTING
At ready mode, hold and
press MANUAL for 3
seconds to customize the
SHORT and LONG
output.
1. , , are ON. If no
action within 30 seconds,
unit returns to preheat/
ready mode.
--OR--
2. Press or button.
a. or LED remains on.
b. Espresso is dispensed.
c. When desired amount is dispersed into
cup, press again. That will be the
programmed amount.
d. or LED turns off and unit
returns to preheat/
ready mode.
To reset to factory setting at
ready mode, press and hold
and at the same time
for 3 seconds.
1. ,and and LEDS flash 3 times.
2. Default setting is on and unit will return to
preheat/ready mode.
TEMPERATURE
CONTROLS
Hot is the default setting.
If Extra Hot is desired, press
the button and allow less
than 10 seconds for the
temperature to rise. The
flashing light will turn steady when it has
reached temperature.
Energy Saver Mode
After 30 minutes of non-use the espresso
machine will automatically switch to sleep
mode and all the control lights will be
dimmed by about 50%. When any button is
pressed, the espresso machine will return to
preheat mode and all the lights will flash. The
machine is ready to operate when all the
lights are steady again.
Auto-Off Mode
Following the 30-minute
Energy Saver cycle, if
there is an additional 30
minutes of non-use, the
espresso machine will
turn off. Press the power
button to turn on again.
CLEANING AND
MAINTENANCE
Cleaning External Parts
We recommend regular cleaning of the
espresso maker’s external components.
1. Never immerse the machine in water or
other liquids. The housing and external parts
may be cleaned with a soapy, damp, non-
abrasive cloth.
2. To remove the drip tray, simply slide it
toward you, keeping it level at all times in
order to prevent spills. The drip tray and drip
tray grate are dishwasher safe. Do not clean
drip tray with cleansers, steel wool pads or
other abrasive materials.
Cleaning the Water Reservoir
It is normal over time for discoloration,
spotting or staining to appear in the water
reservoir. Results will vary depending on the
mineral content of the bottled or filtered
water used but will not affect the operation
of the machine. However, be sure to clean
the water reservoir regularly to minimize
build-up.
Clean inside the water reservoir with a damp,
lint-free cloth as necessary.
Decalcification
Mineral content in water varies from place to
place. Depending on the mineral content of
the water in your area, calcium deposits or
