7
BEFORE BREWING YOUR
FIRST POT OF COFFEE
Rinsing your coffeemaker: During the
manufacturing process, dust can get trapped in
the unit. We recommend flushing out the system
before brewing your first pot of coffee. Simply fill
the reservoir, power on the unit, and follow steps
1, 3 and 5 on page 8 under MAKING COFFEE.
Do not add coffee.
PROGRAMMING YOUR
COFFEEMAKER
SETTING THE CLOCK
When the Function knob is turned to Clock and
the coffeemaker is plugged in, 12:00 will flash in
the display for 10 seconds, indicating the unit is in
Clock Set mode. If 12:00 stops flashing, simply
press and hold Hour or Minute button to return to
flashing Clock Set mode.
Turn the function knob to CLOCK
Press both Hour and/or Minute buttons to select
the desired time. Hold buttons down to scroll
through the digits, or press and release to
advance one digit at a time. When scrolling,
the numbers will advance slowly and then speed
up, so as number displayed approaches the
desired time, press and release to advance one
digit at a time. Be sure the PM indicator is on if a
PM time is desired. If neither button is pressed for
five seconds, the clock will stop flashing and
selected time will be displayed.
SETTING THE AUTO-ON TIME
1. Turn the Function knob to PROG
The digital display will flash the default (12:00)
or previously selected time. Follow directions
under SETTING THE CLOCK (in previous
section) to program your start-brew time.
2. Turn the Function knob to Auto On
LCD will display the current time.
3. Press and release On/Off button
The blue light indicates that the coffeemaker is
in Auto On mode. The blue On/Off light will
come on when brew cycle begins and will go
off when Keep Warm cycle ends.
NOTE:
To start brew time at the same time the
next day, simply make sure the Function knob
is on Auto On and press and release the On/Off
button once more. Blue Auto On light will go
on.
NOTE:
To exit auto on mode, rotate the knob to
another position. Auto on light will go off.
Charcoal Water Filter
Your coffeemaker comes with a charcoal water
filter that eliminates chlorine, bad tastes and
odors from tap water.
Inserting the Water Filter
• Remove the filter from polybag and soak it,
fully immersed, in cold tap water for
15 minutes.
• Lift the water filter holder out of the
water reservoir.
• Press down on the filter compartment
and pull toward you to open.
• Place filter into the holder and snap it
closed. Be careful – improper placement
can tear the filter skin.
• Flush filter by running cold
tap water through holes in
bottom of compartment for
10 seconds.
• Allow the filter to drain
completely.
• Slide the water filter
holder back into the channel
in the water reservoir,
pushing it down to the
base of the unit
.
NOTE:
We recommend
changing the water filter
every 60 days or after 60
uses, and more often if you
have hard water.
Replacement filters can be
purchased in stores, by
calling Cuisinart Customer
Service (1-800-726-
0190), or at www.
cuisinart.com
Summary of Contents for Brew Central CBC-7200PC
Page 11: ...11 NOTES ...
