background image

8

DON’T:

•   Don’t store food or liquids in your blender jar.
•   Don’t place cutting assembly and locking ring onto motor base 

without the blender jar attached. 

•   Don’t attempt to mash potatoes, knead heavy dough, or beat 

egg whites.

•   Don’t remove blender jar while unit is on. Keep the blender jar 

cover on the blender jar while blending. 

•   Don’t twist locking ring from blender jar when removing blender 

jar from motor base. Simply lift blender jar from motor base.

•   Don’t overprocess foods. Blender will achieve most desired 

results in seconds, not minutes.

•   Don’t overload blender. If the motor stalls, turn the blender off 

immediately, unplug the unit and remove a portion of the food, 

then continue. 

•   Don’t use any utensil inside the blender jar while the motor is on.
•   Don’t use any container or accessories not recommended by 

Cuisinart

®

. Doing so may result in injury.

•   Don’t put hands inside the blender jar when blender is plugged in.
•   Don’t add boiling liquids or frozen foods (except ice cubes or 

1cm pieces of frozen fruit) to glass blender jar. Boiling liquids 

should cool for 5 minutes before being poured into blender jar.

•   Don’t run blender when jar is empty.

FOOD PROCESSOR FEATURES 

1.  

Food pusher with drizzle hole

2.  

Work bowl cover with feed tube

3.    

Stainless steel chopping blade

 

4.    

Stainless steel reversible  

slicing/shredding disc

5.  

Adapter stem 

6.  

Clear work bowl 

7.  

Work bowl collar

8.  

Motor base

  

Used for both the blender 

jar  

and the food processor bowl

1.

2.

3.

4.

5.

6.

8.

7.

Summary of Contents for BFP-603A Series













Reviews: