date
page
10/2010
7 of 13
20050 SW 112
th
Ave. Tualatin, Oregon 97062 phone 503.612.2300 fax 503.612.2380 www.cui.com
PART NUMBER:
DESCRIPTION:
AMT203
DEMO KIT USER GUIDE
© 2010 CUI Inc. All rights reserved.
Information in this document is subject to change without notice.
RUNNING HYPERTERM TO TEST THE INTERFACE
Hyperterm is a common terminal emulator found on Windows XP, it is not on later Windows operating systems but
there are substitutes or you can use TCL commands as described below.
A. Set up Hyperterm in the properties menu, for example set up a new session called “usbftdi.ht”.
B. ”Connect to” set to the com port that
C. In the congifuration submenu, the Bits per second should be
shows up in device manager, for
115200m with 8 data bits, parity none, 1 stop bit, flow control
example COM1:.
none.
D. Select ‘Properties’ from the ‘File’ pull-down menu, click on the ‘Settings’ tab. Select ‘VT100’ in the ‘Emulation’
pull-down menu, click the ‘Terminal Setup…’ dialog button and click the ‘Keypad application mode’ box. Click
on the ‘ASCII Setup…’ dialog button, click the boxes marked ‘Send line ends with line feeds’ and ‘Echo typed
characters locally’:
