3.Fixing the feet
. Turn the highchair upside down.
each of the four legs has a spring loaded pin.
. Push firmly on the foot at either end until each of the two spring pins clicks
into place . Repeat for the other foot.
- the rear foot is indicated by a red circular sticker located on the plastic
foot.
. Take one stop washer and insert the short screw , then insert it into the
bottom hole at the rear of the front left leg , repeat the process for the right
. IMPORTANT!
. Line up one of the feet so that the small hole on the top of the foot lines up
with the pin .
. NOTE
leg.
3