User Manual airCUE-8X10, airCUE-6X10
www.cuesystem.com
Page 19 of 28
Status
This page shows current status of the touch panel.
IP Settings
This page is used for setting the communication
parameters for your touch panel. The airCUE uses
standard internet protocol (IP) communication
parameters. Certain parameters can be reset by the
user. On start up, this page will display current IP
address. Carefully note this addressing information
(and any changes you elect to make to the IP address,
subnet mask, or default gateway). This information
must be entered into the CUE System Director®
program written for your specific application. For
control systems with more than one unit, a unique IP
address must be given to each CUE device.
For setting please select appropriate field and use numeric keypad. Be sure to click the Apply button for any
changes to the IP settings to become effective.
Note:
The Ethernet connector has to be plugged in prior switching from Wi-Fi to LAN.
Applications
This screen is used for selection; start and stop of
uploaded applications (touch panel layouts). All
uploaded applications are listed on this page.
A “running flag” denotes the active application. The
running application can be stopped via the
Stop
button.
Files are uploaded from a personal computer to the
touch panel using CUE System Director software or
using Admin Web.
