Quick Installation Guide
Model:
GS1010PE
810600082
LED and Interface Explanation
4
PWR
Link ACT
Power LED
Link LED
ON
OFF
ON
OFF
Flashing
Powered
No power
Link connected
Link disconnected
Link data transmitted
Email: [email protected]
For support and warranty, please visit: http://www.cudy.com/. Specifications are subject to change
without notice. Cudy is a registered trademark of Shenzhen Cudy Technologies Co., Ltd. Other
brands and product names are trademarks or registered trademarks of their respective
holders.Copyright©2020 Shenzhen Cudy Technology Co., Ltd. All rights reserved.
EU Address: Otto esser 2c, 65451 Kelsterbach, Germany
EU declaration of conformity
Cudy hereby declares that the device is in compliance with the essential requirements and other
relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC and 2011/65/EU.The
original EU declaration of conformity may be found at http://www.cudy.com/
Trouble Shooting
●
Make sure the equipment is installed according to the manufactures installation guide.
●
Confirm RJ45 cable order meets EIA TIA568A or 568B standard.
●
Replace the equipment with a proper functioning PoE Ethernet Switch to check if the equipment
is damaged.
●
Please contact your vendor if trouble still exists.
Email:
Website:
www.cudy.com