Cuckoo CRP-Q10 Series, Operating Instructions Manual

Page: 12 / 44

HOW TO CLEAN
12
•
proper maintenance of the pressure packing helps keep high airtightness, adds durability to packing and ensures the taste of the food.
•
Read the directions below carefully to install your packing properly.
How to remove and clean the pressure packing
How to install the Double Motion Packing (Pressure Packing)
The all-stainless cover is not only delamination-free and easy to clean, but it also lasts long,
In addition, CUCKOO’s special stainless CSV-a CUCKOO’s patented technology, improves the
product’s durability and makes it easier to clean.
①
Unplug the power cord and wait until the
pot cools down before opening the Top
Cover.
③
After hand washing it with a neutral
cleaning liquid and a sponge, wipe it
clean with a well wrung dish cloth.
②
To remove the pressure packing, hold it as
shown in the picture above and pull it out.
▶ Figure.1
Standard points
on the pressure packing.
Standard notches
on the Inner Pot lid.
2
4
5
1
3
6
•
First match the standard notches on the Inner Pot lid with the standard points on the pressure packing following the numerical order (1, 2, 3, 4, 5, 6).
Then, press the outer rim of the packing to insert it into the groove. To reassemble the pressure packing follow the order described below:
1
How to reassemble the pressure packing
2
②
After matching the standard points 1 to 6, press the rest of the packing into the
groove by pushing on its outer rim.
①
As the Figure 1 shows, put the point #1 on the pressure packing with the standard
notch #1 on the Inner Pot lid together before pressing the outer rim of the packing
to insert it into the groove. Repeat with points #2 to # 6.