Cuckoo CRP-M1059F Series, Operating Instructions Manual

Page: 15 / 84

HOW TO SET CURRENT TIME / HOW TO SET
OR CANCEL VOICE GUIDE FUNCTION
www.cuckoo.co.kr
ENGLISH
First hold the mode button for more than 1sec. Then enter this function, press Mode button 2 times.
Voice guide volume control (The function which can control volume and cancel)
Press mode button once.
Press mode button for more than 1sec.
“Current time mode press yes button” after setting current time
with selection button Menu/Selection button blinks and Mode,
Set and Cancel buttons turn ON.
Colon mark ( ) on the sec. screen is blinking once per second.
1
About Lithium battery
This product contains lithium battery for improving blackout
compensation and time. Lithium battery lasts for 3 years.
When current time is not displayed on the screen, it means the battery
is exhausted. It should be replaced.
What is blackout compensation
This product remembers and maintains previous condition and
processes. After finishing a blackout, it operates immediately.
If blackout happens during cooking, the cooking time will be
delayed depending on blackout time.
If the rice became cold because of blackout, warming will be
cancelled.
How to set current time during keep
warming mode
1. Press Cancel button to cancel keep warm
and then press Mode button over 1 time to
set current time.
2. After setting time, press keep warm button
to re-start keep warm.
ex) 8:25am now
How to set current time
When you finish setting the time you want the press "Set" button.
If it is over 7 sec without yes button, setting time will be canceled with
voice, “it is canceled due to exceeded time limit”.
3
set o'clock and minutes by pressing the
menu/selection button.
2
Set to desired voice volume, and press Set button.
‘ ’ sign is displayed when entered volume control mode by
pressing Mode button 2 times.
If set value became ‘ ’ by pressing button, voice guide function
is off.
Press button to set ‘ ’, that is the maximum volume sound.
When finish setting desired volume, press Mode button to store.
1 min up " " button
1 min down " " button
10 min up or down " ", " " keep pressing.
Careful of setting am,pm.
In case of 12:00 it is 12:00 pm.
<Standby mode>