Cuckoo CRP-JH06 Fuzzy Series, Operating Instructions Manual, Page: 13 / 34

HOW TO CLEAN
w
w
w
.c
u
ck
o
o
.c
o
.k
r
2. To close the lid turn the handle to
unlock, in shown in the picture on
the right.
1. Check to make sure the inner pot is
place correctly inside the main body.
3. If there is excess steam inside the
inner pot it might be difficult to lock
the handle. Twist the pressure
weight and allow the excess steam
to release. Then try to turn the
handle again.
Do not try to close the lid by force. It can cause problems.
❶
Separate dew dish
❷
Separate the drain
ditch cap by pushing
it down.
❸
Clean the drain ditch
cap and dew dish with
a neutral detergent.
❹
Clean the drain
ditch cap with brush
kit.
❺
Securely put in the
dew dish after
cleaning.
• The valve hole of the pressure weight allows steam to release. Check regularly to ensure that it not blocked.
If the valve hole of the pressure weight is blocked, the hot steam and hot content within the cooker can
cause serious injury.
※
Do not use the cleaning pin for any other use except to clean the valve hole of the pressure weight.
Cleaning Pin
If the valve of the pressure part is clogged, puncture it with the cleaning pin
How to
disassemble the
pressure weight
▶
Under the Lock/Unlock handle is locked(located on “Lock”) turn the pressure weight counter-
clockwise while pulling it up, and pull it out.
▶
Puncture the clogged valve hole with the cleaning pin and reassemble it by turning it clockwise.
▶
When the pressure weight is properly assembled, it can freely be turned.
Pressure Weight
※ Attached on the
botton of the
unit.
Alien
Substance
Soft steam cap
Do not touch the surface of the soft steam cap right after cooking. You can get burned.
❶
Detach the soft
steam cap like
the picture.
❷
Press the hooks in the front in direction of arrow to detach
the bottom case. Clean the parts frequently with a sponge
or a neutral detergent.
※
Before reassembling the packing with the bottom case, please
make sure to put the packing into the packing groove.
※
In order to separate the steam cap into parts, please pull bottom
part downward by pressing the extrusion parts on both sides.
❸
Before reattaching the
parts, fit the bottom case
into the groove of steam
cap perfectly. Press the
hooks in direction of
arrow to assemble the
parts together.
❹
After attaching the
soft steam cap on
the lid as shown in
above picture, press
the cap firmly to
assemble the cap
into the product.
packing
groove of steam cap
packing groove
neutral detergent