Cuckoo CRP-HV06 Fuzzy Series, Operating Instructions Manual

Page: 29 / 84

TO KEEP COOKED RICE WARM AND TASTY
www.cuckoo.co.kr
Press “Mode” button over
1 time during warming. It displays
as picture with buzzer.At the time,
means current warming
temperature.
“M enu/Selection” button will blink, and
“Mode”, “Set” and “Cancel” buttons will be
turned ON.
Press “Menu/Selection” button to
change the temperature as
Press “Menu/Selection” button
to change the temperature as
1. If too much water is spilled out when you open the lid : Press “Menu/Selection” button to raise the setting mode.
2. If the edge of rice is too soft : Press “Menu/Selection” button to reduce the setting mode.
Controlling method of warming temperature
If the temperature in the oven is not proper, it will smell bad and the color of the rice will change
so make sure to adjust the temperature
Press “Menu/Selection” button
to change as the picture(up)
Select the menu you want, then the press the
“Set” button and set-up time will be
automatically entered with a buzzer. (If you
press the “Cancel” button or do not press a
button within 7 seconds, the function will be
cancelled and returned to standby mode.)
After setting temperature, press “Set”
button. Preset temperature will be stored
with buzzer sound.
(It will be cancelled once press “Cancel”
button or after 7 seconds without
pressing any button.)
Press “Menu/Selection” button
as the picture(down)
How to operate My Mode function.
Use it while opening the lid when there is too much water or rice becomes too soft.
In standby mode, push the
“mode” button 4times.
The voice says that it is
programmed warming
mode, control the
temperature you want.
Note: The reference temperature programmed when the
product is shipped may differ from the Instruction.
If you want to change cooking temperature in the standby mode, press “Mode select” button over
2 seconds, and press it 2 more times. You can change cooking temperature.
Change of temperature
To raise temperature
To lower temperature
“Set” button will blink, and “Mode”, “Menu/Selection” and
“Cancel ” buttons will be turned ON.
To switch the functions continuously, keep pressing the button.
“Set” button will blink, and “Mode”, “Menu/Selection” and
“Cancel ” buttons will be turned ON.
To switch the functions continuously, keep pressing the button.
“Set” button will blink, and “Mode”, “Menu/Selection” and
“Cancel ” buttons will be turned ON.
To switch the functions continuously, keep pressing the button.
“Set” button will blink, and “Mode”, “Menu/Selection” and
“Cancel ” buttons will be turned ON.
To switch the functions continuously, keep pressing the button.