Cuckoo CRP-HS06 Fuzzy Series, Operating Instructions Manual, Page: 28 / 84

TOKEEPCOOKEDRICEWARMANDTASTY
Press “Mode” button over
1 time during warming. It displays
as picture with buzzer.At the time,
means current warming
temperature.
“Menu/Selection”buttonwillblink,and
“Mode”,“Set”and“Cancel”buttonswillbe
turnedON.
Press “Hour/up” button to change
the temperature as
Press “Minute/Down” button to
change the temperature as
1. If too much water is spilled out when you open the lid : Press“Menu/Selection”buttontoraisethesettingmode.
2. If the edge of rice is too soft : Press “Menu/Selection” button to reduce the setting mode.
Controlling method of warming temperature
If the temperature in the oven is not proper, it will smell bad and the color of the rice will change
so make sure to adjust the temperature
Press “Menu/choice” button to
change as the picture(up)
Selectthemenuyouwant,thenthepressthe
“MyMode”buttonandset-uptimewillbe
automatically entered with a buzzer. (If you
press the “Cancel” button or do not press a
buttonwithin7seconds,thefunctionwillbe
cancelledandreturnedtostandbymode.)
After setting temperature, press “Mode”
select button. Preset temperature will be
stored with buzzer sound.
(It will be cancelled once press “Cancel”
button or after 7 seconds without
pressing any button.)
Press“Menu/choice”buttonas
thepicture(down)
How to operate My Mode function.
Use it while opening the lid when there is too much water or rice becomes too soft.
In standby mode, push the
“mode” button 4times.
The voice says that it is
programmed warming
mode, control the
temperature you want.
Note:Thereferencetemperatureprogrammedwhenthe
productisshippedmaydifferfromtheInstruction.
If you want to change cooking temperature in the standby mode, press “Mode select” button over
2 seconds, and press it 2 more times. You can change cooking temperature.
Change of temperature
Toraisetemperature
Tolowertemperature
“Set”buttonwillblink,and“Mode”,“Menu/Selection”and
“Cancel”buttonswillbeturnedON.
Toswitchthefunctionscontinuously,keeppressingthebutton.
“Set”buttonwillblink,and“Mode”,“Menu/Selection”and
“Cancel”buttonswill beturnedON.
Toswitchthefunctionscontinuously,keeppressingthebutton.
“Set”buttonwillblink,and“Mode”,“Menu/Selection”and
“Cancel”buttonswillbeturnedON.
Toswitchthefunctionscontinuously,keeppressingthebutton.
“Set”buttonwillblink,and“Mode”,“Menu/Selection”and
“Cancel”buttonswillbeturnedON.
Toswitchthefunctionscontinuously,keeppressingthebutton.