HOW TO CLEAN
29
w
w
w
.c
u
ck
o
o
.c
o
.k
r
E
N
G
L
IS
H
※
In order to separate
the steam cap into
parts, please pull
bottom part
downward by
pressing the
extrusion parts on
both sides.
❸
Before reattaching the parts, fit the
bottom case into the groove of
steam cap perfectly. Press the
hooks in direction of arrow to
assemble the parts together.
❹
After attaching the
soft steam cap on
the lid as shown in
above picture, press
the cap firmly to
assemble the cap
into the product.
❶
Detach the soft
steam cap like
thepicture.
❶
Press the hooks in the front in direction of arrow to
detach the bottom case. Clean the parts frequently with
a sponge or a neutral detergent.
※
Before reassembling the packing with the bottom case,
please make sure to put the packing into the packing
groove.
packing
packing groove
groove of steam cap
How to clean the pressure weight nozzle.
2. To close the lid turn the handle to
unlock, in shown in the picture on
the right.
1. Check to make sure the inner pot is
place correctly inside the main body.
3. If there is excess steam inside the
inner pot it might be difficult to lock
the handle. Twist the pressure
weight and allow the excess steam
to release. Then try to turn the
handle again.
Do not try to close the lid by force. It can cause problems.
When lid does not close perfectly
❷
Separate cover as the
arrow points.
❸
Use brush kit. You can
easily clean a drain use
the ditch cap and tough
pat to clean.
❹
When using cleaning
pin, pull out cleaning
pin and make it meet at
right angles.
❺
Only use for the
vlave hole of the
pressure weight.
❶
Separate cleaning pin Attached on
the bottem of the unit from main body
as shown in picture.
How to use cleaning pin and brush kit
❶
Separate dew dish
❷
Separate the drain ditch
cap by pushing it down.
❸
Clean the drain ditch cap
and dew dish with a
neutral detergent.
❹
Clean the drain ditch
cap with brush kit.
❺
Securely put in the dew
dish after cleaning.
How to clean dew dish
How to clean the soft steam cap
※
Do not touch the surface of the soft steam cap right after cooking. You can get burned.
•
The valve hole of the pressure weight allows steam to release. Check regularly to ensure that it not blocked.
If the valve hole of the pressure weight is blocked, the hot steam and hot content within the cooker can
cause serious injury.
※
Do not use the cleaning pin for any other use except to clean the valve hole of the pressure weight.
Cleaning Pin
If the valve of the pressure part is clogged, puncture it with the cleaning pin
How to
disassemble the
pressure weight
▶
Under the Lock/Unlock handle is locked(located on “Lock”) turn the pressure weight counter-
clockwise while pulling it up, and pull it out.
▶
Puncture the clogged valve hole with the cleaning pin and reassemble it by turning it clockwise.
▶
When the pressure weight is properly assembled, it can freely be turned.
Pressure Weight
※
Attached on the
botton of the
unit.
Alien
Substance
Soft steam cap
neutral detergent
Summary of Contents for CRP-GH10 Fuzzy Series
Page 31: ...MEMO 83 www cuckoo co kr ...
