Cuckoo CRP-AH10 Fuzzy Series, Operating Instructions Manual

Page: 26 / 84

HOW TO PRESET TIMER FOR COOKING
Check if the current time and the menu are correct.
Refer to page 13 for the time setting.
If the current time is not set correctly, the presetting time will
also be incorrect.
Make sure to select AM or PM correctly.
1
Turn the Lock/Unlock handle to the lock
position and a lock icon will be displayed on the
screen. Then press the "preset" button.
To activate Preset 1, press the "preset" button once. To activate Preset
2, press the "preset/timer" button twice.
Factory Set Configurations-Preset 1 : Preset at 6:30 am, Preset 2 :
Preset at 7:00pm. If you want to use these times, select Preset 1 or
Preset 2.
If the lock/unlock handle is not in the locked position then you will not
be able to program or use the preset function.
When you press the "preset" button, the preset time will be displayed,
and the Preset 1 & Preset 2 signs will be blinking.
Gaba menu, you have to select " " in order to use the preset timer
function.
When it is in keep warm mode, press cancel to exit keep warm mode,
then select your desired preset time.
2
Select menu with "Menu/Selection" button. 3
Press "Pressure Cook"button.
It says that preset cook for glutinous is booked Preset cook will be
completed at the timer.
Once cook is completed with preset time, preset time is stored in the
memory.
Don't need to set up time again.
If a small amount of rice is cooked, it could be finished earlier than
time you programmed it.
5
Preset the time.
In case of setting up timer while warming, increases by 10min
when you press " "button.
Please set up timer after canceling warming, decreases by
10min when you press " " button
If you keep on pressing either button, It can be changed continually.
Please be careful no to change frome AM to PM.
Then press the "Set" button to program your desired time.
4
How to preset timer for cooking
How to use timer function