온수
잠금
HOT
LOCK
ROOM
COLD
온수
잠금
HOT
LOCK
ROOM
COLD
21
How to check filter usage level
To Use the Filter Reset Function
❶
In standby mode, press the [Energy Save/Setting]
button for 3 seconds.
▶
Enter the user setting mode.
❷
After entering user setting mode, press the [Lock]
button once.
▶
“Filter replacement alarm setting mode” voice guide will function
❸
Press the [Energy Save/Setting] button to enter the filter replacement notification
setting mode.
❹
Press the [Non-Stop] button to set the filter replacement alarm function.
▶
Repeats ON / OFF every time button is pressed.
Ex) ON
→
OFF
→
ON
→
OFF
→
...
❺
Select filter change notification ON / OFF and press [Energy Save/Setting] button to
save.
▶
“Set-up completed” voice guide will function
※ When the function is turned OFF, the filter replacement alarm does not operate.
When using filter alarm
HOT
HOLD
SELECT MODE SELECT
LOCK
(3SEC)
ENERGY SAVE/
SETTING
(3SEC)
HALF
CUP
ONE
CUP
NON-
STOP
HOT
TEMP.
TIME/
STERILIZE
(3SEC)
FILTER
RESET
(3SEC)
ROOM
COLD
❶
In standby mode, press the [Energy Save/Setting]
button for 3 seconds.
▶
Enter the user setting mode.
❷
After entering user setting mode, press the [Lock]
button twice.
▶
“Sterilizer Kit Module” voice will function
❸
Press the [Energy Save/Setting] button to enter sterilizing notification setting mode.
❹
Press [Non-Stop] button to cancel Sterilization recommended alarm notification.
▶
Repeat ON / OFF every time button is pressed.
Ex) ON
→
OFF
→
ON
→
OFF
→
...
❺
Select sterilization recommended alarm ON / OFF and press [Energy Save/Setting]
button to save.
▶
“Set-up completed” voice will function.
※ Sterilization recommended alarm will not function when turned OFF.
When wanting to use Sterilization recommended alarm
HOT
HOLD
SELECT MODE SELECT
LOCK
(3SEC)
ENERGY SAVE/
SETTING
(3SEC)
HALF
CUP
ONE
CUP
NON-
STOP
HOT
TEMP.
TIME/
STERILIZE
(3SEC)
FILTER
RESET
(3SEC)
ROOM
COLD
How To Use
ENG