Cuckoo CH-6851V, Operating Instructions Manual

Page: 22 / 40

CHECK BEFORE ASKING FOR SERVIRE
If you operate incorrectly, this product can’t work.
If it doesn’t work, call the service center after checking this list.
Airflowand
Sprayisn t
made?
Airflowismade
butSprayisn t
made
Warm
humidification
isn tmade
Whentoolow
sprayvolume
ismade
Did you put a plug in the socket?
Isn t REFILL alarm lamp displayed as
red color?
Isn t too much water in water tank section?
Isn t desired humidity is the same as present
humidity or fixed very low?
Did you find oil component of soap or cosmetic
at the time of cleaning?
Did long time pass after you operated product?
Is water too cold?
Does the oscillator stain?
Put a plug in the socket.
Put water into water tank.
Remove water in water tank, fasten water tank cover,
and put it again.
Make desired humidity higher than present humidity.
(Only when desired humidity is higher than present
humidity, spray can be made.)
Wash water tank, spray room and spray outlet again
with clean water.
It takes a short time to boil the water warm.
After about 10 minutes, warm humidification is made.
Because, if water temperature can be low, fix spray
volume as maximum and operate it for about 10
minutes.
Clean oscillator and water tank section.
REFILL