CUBICON Style Plus-A15 Series
User Manual
Maintenance of the Heating Bed
Cleaning for Normal Auto Leveling
Style Plus measures the difference in height that is created by pressing the tip of the nozzle. It is
developed to make the precise printing possible through measuring the Z-axis height of the 9 points on
the heating bed.
While the nozzle is measuring and printing through such way, some residues from some printouts may
adhere to the surface of heating bed. If such foreign substances adhere to the surface of heating bed, the
printing may not be done correctly as a problem occurs in the Auto Leveling due to the interference to the
nozzle.
Therefore, regular cleaning of the bed and accessories are required after printing.
As for the removal of pollutants on the heating bed, always keep it clean using a scraper and tweezers
that are supplied as accessories. When using tools, be cautious not to damage the surface of heating
bed. If the surface gets damaged, the printout would not adhere well as the coating gets peeled off.
The area that is marked with a red circle in the picture is a heating bed part to be cleaned.
When cleaning the heating bed, be sure to perform the task while keeping the power in the
off state.
59
