Cube Controls SRLS
Contact: [email protected]
www.cubecontrols.com
Hand made in Italy
Adjusting the shift paddles activation point
While all the steering wheels are delivered in a perfectly working condition, sometimes you need
to adjust the shifter sensor activation point.
That's a pretty simple procedure, just a 2mm allen key and a small philips screwdriver are needed.
Connect the wheel to your PC and open the game controllers window, select your wheel from the
list and press properties. You should see a window with all the buttons available on the wheel.
Locate and remove the two screws on the back of the wheel:
Carefully put a small philips screwdriver inside the screw hole until you feel it engages the trimmer.
Press the paddle you are adjusting and keep it pressed, rotate the trimmer until the downshift
button (30) or upshift button (31) are on. Now check if the shifter is working properly.
Repeat this for the other paddle if needed.
Done!
