Cub VS-95A043, User Manual & Installation Manual

Page: 4 / 16

3
If the connector is
dislocated, please
replace the connector
to its original position.
Please do not pull the
connector apart by
pulling the harness.
Please do not pull
the harness by force.
Connect the connector
and terminal tightly.
Cut off the excessive
length of the cable tie.
RF Standard
(1)
(2)
NCC low-power radio waves radiated device management methods
：
Companies, stores, or users are prohibited from changing
the frequency, increasing the power, or modifying the
characteristics and functions of the original design of the
certified low-power radio waves radiated device without
permission.
The use of low-power RF devices must not affect the
safety of aviation and interfere with legal communications.
If any interference occurs, they should be stopped
immediately and improved to the extent of no interference
before users can use the legal communications mentioned
in the previous paragraph, i.e., radio communications
under the provisions of the Telecommunications Act. Low-
power RF devices must endure interference from legal
communications or industrial, scientific, and medical radio
wave-radiated electrical equipment. Article 12:
Article 14:
FCC regulations
：
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received, including
interference that may cause undesired operation.