9
See step 2.1.2, then use
arrow key to browse.
Press
“OK” key to enter.
Press
“OK” key to enter.
Press
“OK” key to enter.
Function immediately
starts scanning for a
source sensor whose ID
will be copied.
After source ID is
detected, press “OK” key
to copy ID into target
sensor.
Function immediately
starts scanning for a
source sensor whose ID
will be copied.
After source ID is
detected, key in new ID
by means of the
keyboard, then select
Modify and press “OK”
key.
NOTE Duplicate and Programming functions will only work with CUB
’s Sensor-AID and
Uni-sensor.
Duplicate: To duplicate a manual ID to a Uni-Sensor (will be enabled after keying in
first character).
HEX to DEC: To change between HEX and DEC ID formats (enabled at the beginning,
becomes disabled once first character is keyed in).
ID VIEW: To see the ID location on the OE sensor.
2.1.2.4 ID MODIFY
2.1.2.4.1 SENSOR ID COPY
2.1.2.4.2 MANUAL ID MODIFY
