15.407 of the FCC Rules.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received, including interference that
may cause undesired operation of the device.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter.
Caution
1.
This sensor can be used in truck and bus tubeless tires only (rim
diameter
≧
22.5”).
2.
The vehicle speed must not exceed 120 km/h (75 mph).
Installation
For 2.4 GHz type
1.
Dismount the tire from the rim. If applicable, take out any existing
TPMS sensors.
2.
Use the Cub Retrofit truck tool to program the correct wheel position ID
to the sensor, then throw it into the corresponding tire.
3.
Write the wheel position ID on the label (contained in the 20-pcs
package box) and paste it on the outside of the rim, near the valve, as
an indicator of the presence of a sensor in the wheel and of the wheel
position ID.
