Radar Function Instruction
Due to the large vehicles exist blind spots, it is difficult to observe
pedestrians and vehicles entering the blind spot of the inner wheel difference.
Ｗ
hen cars turn may cause traffic accidents in frequent. The inner wheel
difference is the difference between the turning radius of the inner front
wheel and the turning radius of the inner rear wheel when the vehicle turns.
Because of the inner wheel difference, if you only focus on passing front
wheels and neglect the difference between the inner wheels during driving, it
may cause the road or colliding with other objects.
To avoid this problem could install a set of radars outside of the car. It could
detect blind spot and provide alerts reminding drivers to pay attention
ensuring safety of passengers and passers-by.
Warning System Instruction
The driver assistance system include:
The millimeter wave radar
The warning indicator
Install Instruction
When the millimeter wave radar is installed on the electric bus, in order to
ensure functional detection and warning system working normally, please
follow below instructions
：
1.
When the surface of radar is covered by dirt, sandstone, waterdrop, or
snow, it may cause the malfunction; consequently, please make sure to
sustain the cleanness of the radar and its surrounding area anytime.
2.
The radar and its surrounding area are not able to withstand severe
impact; it may cause the system abnormality or malfunction. Whenever
the radar is getting a severe impact, please make sure to go to the
maintenance depot for inspections.
3.
No alteration for non-original accessories (e.g. spraying paint, baking
paint, and metal parts, etc.) is allowed around the surrounding area of
radar; it may cause the radar abnormality or malfunction.
4.
Avoid the surrounding area of radar gets covered by objects or walls; it
may cause the trail obstacles detection malfunction or reduced its
functionality.
