Cub Cadet J466, Operator'S Manual

Page: 7 / 32

7
2
Safe
Operation
Practices
WARNING
This symbol points
out important safety
instructions which,
if not followed, could
endanger the per-
sonal safety and/or
property of yourself
and others. Read and
follow all instruc-
tions in this manual
before attempting to
operate or service
this vehicle. When
you see this symbol
- heed its warning.
Your
Responsibility
Restrict the use
of this power machine
to persons who read,
understand and follow
the warnings
and instructions
in this manual
Safety Frame (OPS)
1. Your vehicle is equipped with a operator protective
structure (OPS) which must be maintained in a fully
functional condition. Use care when driving through
doorways or spaces with a low overhead.
a. Never modify the OPS in any way.
b. Never attempt to straighten or reweld any part
of the main frame or retaining brackets that
have been damaged. Doing so may weaken the
structure and endanger your safety.
c. Never secure any parts other than Cub Cadet
approved accessories on the main frame or
attach the safety frame with anything other than
the special fasteners specified.
d. Never attach ropes, chains, or cables to the OPS
for pulling purposes.
e. Although the OPS provides you the maximum
protection possible, never take unnecessary risks.
Service
1. Use extreme care in handling diesel fuel. It is
extremely flammable and the vapors are explosive.
Use only an approved container.
2. Never remove fuel cap or add fuel with the engine
running.
3. Replace fuel cap securely and wipe off any spilled
fuel before starting the engine as it may cause a fire
or explosion.
4. Extinguish all cigarettes, cigars, pipes and other
sources of ignition.
5. Never refuel the machine indoors because fuel
vapors will accumulate in the area.
6. Never store the fuel container or machine inside
where there is an open flame or spark, such as a
gas hot water heater, space heater or furnace.
7. The cooling system is under pressure. Never remove
the radiator cap when the system is hot. Slowly
turn the cap the to the first stop to release pressure
before removing the cap.
8. Escaping hydraulic fluid under pressure can
penetrate the skin. If fluid is injected into the skin,
seek immediate medical attention. Do not use your
hand to check for leaks. Use a piece of cardboard or
paper.
9. Never run a machine inside a closed area.
10. To reduce fire hazard, keep the vehicle free of any
debris build-up. Clean up oil or fuel spillage.
11. Before cleaning, repairing or inspecting, make certain
all moving parts have stopped. Keep all nuts, bolts and
screws tight to be sure the equipment is in safe working
condition.
12. Never tamper with safety devices. Check their proper
operation regularly.
13. Check brake operation frequently. Adjust and service
as required.
14. Engine components become hot during operation and
can cause a burn. Allow to cool down before touching.
15. Do not change the engine governor settings or
overspeed the engine. Excessive engine speeds are
dangerous.
16. Observe proper disposal laws and regulations.
Improper disposal of fluids and materials can harm the
environment and the ecology.
17. Prior to disposal, determine the proper method to dis-
pose of waste from your local Environmental Protection
Agency. Recycling centers are established to properly
dispose of materials in an environmentally safe fashion.
18. Use proper containers when draining fluids. Do not
use food or beverage containers that may mislead
someone into drinking from them. Properly dispose of
the containers immediately following the draining of
fluids.
19. DO NOT pour oil or other fluids into the ground, down
a drain or into a stream, pond, lake or other body of
water. Observe Environmental Protection Agency
regulations when disposing of oil, fuel, coolant, brake
fluid, filters, batteries, tires and other harmful waste.
20. We do not recommend the use of a pressure washer
or garden hose to clean your unit. They may cause
damage to electrical components; spindles; pulleys;
bearings; or the engine. The use of water will result in
shortened life and reduce serviceability.