Cub Cadet FM48, Operator'S Manual

Page: 5 / 52

Warranty does not cover the following:
1. Cleaning, transporting, mailing and service call charges.
2. Normal wear items such as belts, blades, bearings, drivelines, shear pins, slip
clutches, etc.
3. Depreciation or damage caused by normal wear, accidents, improper
maintenance, improper protection or improper use.
4. The use of non original spare parts and accessories.
Your Authorized Company Dealer has genuine parts in stock. Only these approved
replacement parts should be used.
This limited warranty covers defective material and workmanship. The cost of normal
maintenance or repairs for accidents or improper use and related labor will be borne by
the owner.
1.03 - Assembly Instructions
1. Unbolt the wheel arms and discard the mounting bracket.
2. Separate the wheel arms and remove the hardware bag secured between them.
3.
Important: Remove the belt shields to inspect around the belt area and
under the gearbox central plate to be sure the area is clear of packing
material such as blocks of wood, paper, etc.
4. Bolt the wheel arm assemblies to the mower deck with the flat washer and lock
nuts. There is no difference between left/right or front/rear. Be sure both
assemblies are securely mounted.
5. Assemble each wheel to the yokes with one 14x140 mm. bolt and one inner
bushing. Tighten down snugly. The wheel should turn freely but have no side to
side movement.
6. Replace the belt shields.
7. Bolt up the top hitch arms to the
inside of the rear support plates on the rear of
the mower (see fig. 3) .
FM48/FM60/FM72 O
PERATOR
’
S
M
ANUAL
G
ENERAL
I
NFORMATION
5 C
UB
C
ADET
Y
ANMAR
8
7
6
3
1
2
4
5
Fig. 2
1. inner spacer
2. top hitch plate
3. top hitch support
4. bolt
5. top hitch arm
6. lower hitch arm
7. front support plate
8. front roller