9
ASSEMBLY AND OPERATING INSTRUCTIONS
STEP 8
The automatic locking mechanism must be engaged in
one of the three lock position notches on the Locking
Bar before proceeding to service mower.
To raise the mower:
Make sure the cylinder valve is closed by turning the
valve clockwise.
If yes, proceed to insert the handle into the cylinder
handle opening.
Proceed to pump the handle up and down to raise the
lift to the desired height. The cylinder will use pump-
ing action of the handle to raise the lift.
The automatic locking mechanism will engage at
three different lift heights.
The 3 locking positions are: 18” , 21”, 26”
As you pump the handle to raise the lift you will
hear a click sound at each of the locking positions
indicating the locking bar is fully secured.
See below diagram of the locking bar function.
NOTE:
Make sure your mower is in neutral before
you raise your mower. The mower wheels need to
move freely as the mower raises.
LOCKED
When Locking Bar Cover
is parallel with
the Locking Bar, the
Locking Pin is LOCKED
in the Bar teeth.
Locking Pin
Locking Bar
Cover
Locking Bar
NOT LOCKED
When Locking Bar Cover
is raised or angled with
the Locking Bar, the
Locking Pin is NOT
LOCKED in the Bar teeth.
Locking Pin
Locking Bar
Cover
Locking Bar