background image

4

S

ection

 2 — i

mportant

 S

afe

 o

peration

 p

racticeS

Slope Operation

Slopes are a major factor related to loss of 

control and rollover accidents, which can result 

in severe injury or death. If a slope is steeper 

than a 15° incline, do not operate this unit 

on that area. Exercise extreme caution while 
operating on slopes. 

Do:

1. 

Travel straight up and down slopes, not 

across. Exercise extreme caution when 

changing direction on slopes.

2. 

Travel slowly while on a slope. Always 

keep the forward speed limited when 

going down slopes to take advantage of 

the motor braking action.

3. 

Keep all movement on the slopes slow 

and gradual. Avoid starting or stopping 

on a slope.

4. 

Avoid slopes with slippery, loose, or 

bumpy surfaces as they are especially 

hazardous.

5. 

Use extra care while carrying cargo. It 

may affect the stability of the vehicle. 

Spread the load evenly or tie down. 

Do Not:

1. 

Do not travel near drop-offs, ditches 

or embankments. The vehicle could 

suddenly turn over if a wheel is over the 

edge of a cliff, ditch, or if an edge caves 

in.

2. 

Do not stop or start suddenly when 

going uphill or downhill. Be especially 

cautious when changing direction on 

slopes. 

3. 

Do not turn sideways to the hill. The 

vehicle may roll over. If you must turn, go 

slow and do so carefully and gradually.

4. 

Do not carry cargo on steep slopes or 
tow loads.

Towing

1. 

Always use an approved hitch and hitch 

point provided on the utility vehicle.

2. 

Do not tow more than 1200 lbs. rolling 

weight (i.e. trailer plus cargo).

3. 

Never load more than 180 lbs. tongue 

weight on tow bracket provided.

4. 

Go slow and use extra care when towing 

a trailer. Allow for increased braking 

distance. Load trailer properly.

5. 

Do not tow heavy loads on slopes 

greater than 5° incline. When going 

downhill or turning, the extra weight 

tends to push the tow vehicle and may 

cause you to lose control (i.e. braking 

and steering ability are reduced, towed 

equipment may jack-knife and cause 

utility vehicle to overturn).

Cargo Box Loading/Operation

1. 

Do not exceed vehicle’s Total Load 

Capacity rating of 900 lbs. This includes 

operator, passenger, accessories, and 

cargo.

2. 

Do not exceed 400 lbs. load in cargo box.

3. 

Spread load evenly and secure to 

prevent movement.

4. 

Do not load above height of cargo box 

front panel. Load could shift forward and 

injure driver or passenger.

5. 

Avoid loads which exceed the physical 

dimensions of cargo box. 

6. 

Go slow. Heavy loads will affect steering, 

braking, stability, and overall handling of 

the vehicle. Limit loads to those that can 

be safely controlled.

7. 

Avoid sudden starts, stops, and turns 

which could cause load to shift.

Cargo Box Lift

1. 

Stop vehicle on level ground and put the 

vehicle in PARK before raising cargo box.

2. 

On manual lift units, unload cargo box 

before raising cargo box.

3. 

Do not operate vehicle with cargo box in 

raised position.

4. 

Do not operate vehicle with cargo box 

latch unlatched. Always re-latch upon 

manually lowering cargo box. 

Safety Frame (OPS)

1. 

Your vehicle is equipped with a operator 

protective structure (OPS) which must be 

maintained in a fully functional condition. 

Use care when driving through doorways 

or spaces with a low overhead.

a. 

Never modify the OPS in any way.

b. 

Never attempt to straighten 

or reweld any part of the main 

frame or retaining brackets that 

have been damaged. Doing so 

may weaken the structure and 

endanger your safety.

c. 

Never secure any parts other 

than Cub Cadet approved 

accessories on the main frame 

or attach the safety frame with 

anything other than the special 

fasteners specified.

d. 

Never attach ropes, chains, or 

cables to the OPS for pulling 

purposes.

e. 

Although the OPS, when used 

with a properly secured seat 

belt, provides a crush-protective 

environment in the event of a 

tip-over or rollover, never take 

unnecessary risks.

Children

1. 

Tragic accidents can occur if the 

operator is not alert to the presence of 

children. Children are often attracted to 

the vehicle. They do not understand the 

dangers. Never assume that children will 

remain where you last saw them. Avoid 

run over accidents. 

a. 

Keep children out of the 

immediate area of the vehicle 

and in watchful care of a 

responsible adult other than the 

operator.

b. 

Be alert and turn the vehicle off if 

a child enters the area.

c. 

Before and while backing, look 

behind and down for small 

children.

d. 

Never carry small children, they 

may fall off and be seriously 

injured or interfere with safe 

vehicle operation.

e. 

Use extreme care while 

approaching blind corners, 

doorways, shrubs, trees or other 

objects that may block your 

vision of a child who may run into 

the path of the vehicle.

f. 

Remove key when vehicle 

is unattended to prevent 

unauthorized operation.

2. 

Never allow children under 16 years 

old to operate this vehicle. Children 

16 years old and over should read and 

understand the operation instructions 

and safety rules in this manual and 

should be trained and supervised by a 

parent.

3. 

Do not let children ride in the cargo 

box, in the driver’s or passenger’s lap 

or anywhere other than the passenger 

seat. Never give small children a ride; not 

even in the passenger seat. They may 

fall off. 

Service

Safe Handling Of Fuel:

1. 

To avoid personal injury or property 

damage use extreme care in handling 

fuel. Fuel is extremely flammable and the 

vapors are explosive. Serious personal 

injury can occur when fuel is spilled on 

yourself or your clothes which can ignite. 

Wash your skin and change clothes 

immediately.

a. 

Use only an approved fuel 

container.

b. 

Never fill containers inside a 

vehicle or on a truck or trailer bed 

with a plastic liner. Always place 

containers on the ground away 

from your vehicle before filling.

Summary of Contents for Challenger 4x4





















Reviews: