Cub Cadet CC25GHT, Operator'S Manual, Page: 7 / 22

RULES FOR SAFE OPERATION
KNOW YOUR HEDGE TRIMMER
HEDGE TRIMMER COMPONENTS
1. Blades
2. Safety Guard
3. Front Handle
4. Primer Bulb
5. Fuel Cap
6. ON-OFF Switch
7. Throttle Lock
8. Choke Lever
9. Air Filter Cover
10. Spark Plug
11. Starter Handle
12. Safety Switch
13. Rear Handle
14. Throttle Trigger
15. Muffler Cover
RULES FOR SAFE OPERATION
SYMBOL MEANING
• SAFETY ALERT SYMBOL
Indicates danger, warning, or caution.
May be used in conjunction with
other symbols or pictographs.
• READ OPERATOR'S MANUAL
WARNING:
Read the
Operator’s Manual(s) and follow
all warnings and safety
instructions. Failure to do so can
result in serious injury to the
operator and/or bystanders.
• WEAR EYE, HEARING AND HARD-
HAT PROTECTION
• MINIMUM OPERATING DISTANCE
WARNING:
Keep
children, bystanders, and
animals 50 feet (15 meters)
away. If approached stop unit
immediately.
• DO NOT USE IN THE RAIN
WARNING:
Avoid danger-
ous environments. Never operate
your unit in the rain, or in damp or
wet conditions. Moisture is a shock
hazard.
SYMBOL MEANING
• PRIMER BULB
Pump the primer bulb 10 times.
• UNLEADED FUEL
Always use clean, fresh unleaded fuel.
• OIL
Refer to operator's manual for the
proper type of oil.
• ON/OFF CONTROL
ON / START / RUN
• ON/OFF CONTROL
OFF OR STOP
• CHOKE LEVER POSITIONS
1 • FULL
Choke Position
2 • PARTIAL
Choke Position
3 • RUN
Position
SAFETY AND INTERNATIONAL SYMBOLS
This operator's manual describes safety and international symbols and pictographs that may appear on this product.
Read the operator's manual for complete safety, assembly, operating and maintenance and repair information.
6 7
WARNING:
Thrown
objects and loud noise can
cause severe eye injury and
hearing loss. Wear eye protec-
tion meeting ANSI Z87.1-1989
standards and ear protection
when operating this unit. Wear a
hard hat. Use a full face shield
when needed.
11
1
2
3
5
6
7
4
8
9
10
12
13
14
15