background image

IMPORTANT:

 To obtain warranty coverage owner must present an 

original proof of purchase and applicable maintenance records to the 

servicing dealer. Please see the operator’s manual for information on 

required maintenance and service intervals.
The limited warranty set forth below is given by Cub Cadet LLC with 

respect to new merchandise purchased or leased and used in the
United States and/or its territories and possessions, and by MTD 

Products Limited with respect to new merchandise purchased or leased 

and used in Canada and/or its territories and possessions (either entity 

respectively, “Cub Cadet”).
Cub Cadet warrants this product (excluding its

 

Normal Wear Parts 

and Batteries

as described below) against defects in material and 

workmanship for a period of three (3) years, commencing on the date 

of original retail purchase or lease and will, at its option, repair or 

replace, free of charge, any part found to be defective in materials or 

workmanship. 

Normal Wear Parts

 

are warranted to be free from defects in material and 

workmanship for a period of thirty (30) days from the date of original 

purchase or lease. Normal wear parts include, but are not limited to 

items such as:  belts, blades, blade adapters, grass bags, engine oil, air 

filters, spark plugs and wheels. 

Batteries

 

have a one-year prorated limited warranty against defects in 

material and workmanship, with 100% replacement during the first three 

months. After three months, the battery replacement credit is based on 

the months remaining in the twelve (12) month period dating back to the 

original date of original sale or lease. Any replacement battery will be 

warranted only for the remainder of the original warranty period.
This limited warranty shall only apply if this product has been operated 

and maintained in accordance with the Operator’s Manual furnished with 

the product, and has not been subject to misuse, abuse, commercial 

use, neglect, accident, improper maintenance, alteration, vandalism, 

theft, fire, water, or damage because of other peril or natural disaster. 

Damage resulting from the installation or use of any part, accessory 

or attachment not approved by Cub Cadet for use with the product(s) 

covered by this manual will void your warranty as to any resulting 

damage. In addition, Cub Cadet may deny warranty coverage if the 

hour meter, or any part thereof, is altered, modified, disconnected or 

otherwise tampered with.

HOW TO OBTAIN SERVICE: 

Warranty service is available, WITH PROOF 

OF PURCHASE AND APPLICABLE MAINTENANCE RECORDS, through 

your local authorized service dealer. To locate the dealer in your area:

In the U.S.A.:

 

Check your Yellow Pages, or contact Cub Cadet LLC at P.O. Box 361131, 

Cleveland, Ohio 44136-0019, call 1-877-282- 8684 

or log on to our website at www.cubcadet.com. 

In Canada: 

Contact MTD Products Limited, Kitchener, ON  N2G 4J1, call 1-800-668-

1238 or log on to our website at www.mtdcanada.com. 

Without limiting the foregoing, this limited warranty does not provide 

coverage in the following cases:
a.  Routine maintenance items such as lubricants, filters, blade 

sharpening, tune-ups, brake adjustments, clutch adjustments, deck 

adjustments, and normal deterioration of the exterior finish due to 

use or exposure. 

b.  Service completed by someone other than an authorized service 

dealer. 

c.  Cub Cadet does not extend any warranty for products sold or 

exported outside of the United States and/or Canada, and their 

respective possessions and territories, except those sold through 

Cub Cadet’s authorized channels of export distribution. 

d.  Replacement parts and\or accessories that are not genuine Cub 

Cadet parts. 

e.  Transportation charges and service calls.
f.  Cub Cadet does not warrant this product for commercial use.
There are no implied warranties, including without limitation any 

implied warranty of merchantability or fitness for a particular 

purpose. No warranties shall apply after the applicable period of 

express written warranty above. No other express warranties beyond 

those mentioned above, given by any person or entity, including a 

dealer or retailer, with respect to any product, shall bind Cub Cadet.  

The exclusive remedy is repair or replacement of the product as 

set forth above. The terms of this warranty provide the sole and 

exclusive remedy arising from the sale and/or lease of the products 

covered hereby. Cub Cadet shall not be liable for any incidental or 

consequential loss or damage including, without limitation, expenses 

incurred for substitute or replacement lawn care services or for 

rental expenses to temporarily replace a warranted product. 
Some jurisdictions do not allow the exclusion or limitation of incidental 

or consequential damages, or limitations on how long an implied 

warranty lasts, so the above exclusions or limitations may not apply to 

you. 
In no event shall recovery of any kind be greater than the amount of the 

purchase price of the product sold.

 Alteration of safety features of the 

product shall void this warranty. 

You assume the risk and liability for 

loss, damage, or injury to you and your property and/or to others and 

their property arising out of the misuse or inability to use the product. 
This limited warranty shall not extend to anyone other than the original 

purchaser or to the person for whom it was purchased as a gift. 

HOW LOCAL LAWS RELATE TO THIS WARRANTY: 

This limited warranty 

gives you specific legal rights, and you may also have other rights that 

vary in different jurisdictions. 

CUB CADET LLC

MANUFACTURER’S LIMITED WARRANTY FOR 

WALk-BEhIND MOWERS

Cub Cadet LLC, P.O. BOX 361131 CLEVELAND, OhIO 44136-0019, Phone: 1-877-282-8684

MTD Products Limited, kitchener, ON  N2G 4J1, Phone:  1-800-668-1238

GDOC-100088 REV. A

Summary of Contents for 98M





































Reviews: