manualshive.com logo in svg

Cub Cadet 182, Operator'S Manual, Page: 7 / 20

Share
Download
Cub Cadet 182 Operator'S Manual Download Page 7

2

WARNING

Safety

Labels

Safety Labels Found On Your Electric Lawn Mower

DO NOT remove safety 

(or any) labels from 

mower for any reason. 

TO REDUCE THE RISK OF INJURY, DO NOT

OPERATE UNLESS DISCHARGE COVER OR

GRASS CATCHER IS IN ITS PROPER PLACE.

IF DAMAGED, REPLACE IMMEDIATELY.

AC ONLY

E210

DOUBLE INSULATED

26EE

LAWNMOWER

LISTED

WARNING

WHEN REPAIRING THIS UNIT USE ONLY IDENTICAL

REPLACEMENT PARTS. PARTS MUST BE RE -

ASSEMBLED IN PROPER ORDER TO MAINTAIN

DOUBLE INSULATION PROTECTION.  REFER TO

REPAIR PARTS SECTION OF YOUR OWNERS

MANUAL OR CONTACT YOUR AUTHORIZED

SERVICE CENTER.

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT EXPOSE

UNIT TO WATER OR OPERATE UNIT ON WET GROUND.

REPLACE DAMAGED CORD IMMEDIATELY.

DISCONNECT FROM SUPPLY CIRCUIT BEFORE SERVICING OR

REMOVING BLADE.

KEEP HANDS AND FEET AWAY FROM ROTATING PARTS. 

DO NOT MOW WHEN CHILDREN OR OTHERS ARE AROUND.

REMOVE OBJECTS THAT CAN BE THROWN BY THE BLADE IN 

ANY DIRECTION.  WEAR SAFETY GLASSES.

USE EXTRA CAUTION ON SLOPES.  DO NOT MOW SLOPES

GREATER THAT 15˚.  MOW ACROSS, NEVER UP AND DOWN.

NEVER PULL MOWER CLOSE TO YOUR FEET. LOOK DOWN

AND BEHIND BEFORE AND WHILE MOVING BACKWARDS.

READ OPERATOR’S MANUAL. KEEP SAFETY DEVICES (BLADE CONTROL, TRAILING SHIELD, DISCHARGE COVER,ETC.) IN PLACE AND
WORKING.  IF DAMAGED, REPLACE IMMEDIATELY.

AVOID SERIOUS INJURY OR DEATH

PLACE MODEL PLATE HERE

60

12

120

Volts

Amps

Hertz

Summary of Contents for 182





















Reviews:

No comments