Cub Cadet 17AF4BFP009 Operator'S Manual Download Page 3

Important Safe Operation Practices

2

3

General Operation

Read, understand, and follow all instructions on the 

1. 

machine and in the manual(s) before attempting to 
assemble and operate. Keep this manual in a safe place for 
future and regular reference and for ordering replacement 
parts. 

Be familiar with all controls and their proper operation. 

2. 

Know how to stop the machine and disengage them 
quickly.

Never allow children under 14 years of age to operate this 

3. 

machine. Children 14 and over should read and understand 
the instructions and safe operation practices in this manual 
and on the machine and should be trained and supervised 
by an adult. 

Never allow adults to operate this machine without proper 

4. 

instruction. 

To help avoid blade contact or a thrown object injury, 

5. 

keep bystanders, helpers, children and pets at least 75 feet 
from the machine while it is in operation. Stop machine if 
anyone enters the area.

Thoroughly inspect the area where the equipment is to be 

6. 

used. Remove all stones, sticks, wire, bones, toys, and other 
foreign objects which could be picked up and thrown by 
the blade(s). Thrown objects can cause serious personal 
injury. 

Plan your mowing pattern to avoid discharge of material 

7. 

toward roads, sidewalks, bystanders and the like. Also, 
avoid discharging material against a wall or obstruction 
which may cause discharged material to ricochet back 
toward the operator. 

Always wear safety glasses or safety goggles during 

8. 

operation and while performing an adjustment or repair 
to protect your eyes. Thrown objects which ricochet can 
cause serious injury to the eyes. 

Wear sturdy, rough-soled work shoes and close-fitting 

9. 

slacks and shirts. Loose fitting clothes and jewelry can be 
caught in movable parts. Never operate this machine in 
bare feet or sandals. 

Be aware of the mower and attachment discharge direction 

10. 

and do not point it at anyone. Do not operate the mower 
without the discharge cover or entire grass catcher in its 
proper place.

Do not put hands or feet near rotating parts or under the 

11. 

cutting deck. Contact with the blade(s) can amputate 
hands and feet.

WARNING: 

This symbol points out important safety instructions which, if not followed, 

could endanger the personal safety and/or property of yourself and others. Read and follow 
all instructions in this manual before attempting to operate this machine. Failure to comply 
with these instructions may result in personal injury.
When you see this symbol. 

HEED ITS WARNING!

DANGER: 

This machine was built to be operated according to the safe operation practices in 

this manual. As with any type of power equipment, carelessness or error on the part of the 
operator can result in serious injury. This machine is capable of amputating hands and feet 
and throwing objects. Failure to observe the following safety instructions could result in 
serious injury or death.

CALIFORNIA PROPOSITION 65

WARNING: 

Engine Exhaust, some of its constituents, and certain vehicle components 

contain or emit chemicals known to State of California to cause cancer and birth defects 
or other reproductive harm.

WARNING: 

Battery posts, terminals, and related accessories contain lead and lead 

compounds, chemicals known to the State of California to cause cancer and reproductive 
harm. 

Wash hands after handling

Summary of Contents for 17AF4BFP009









































Reviews: