www.cuav.net
- 3 -
Button Definition
RESET Button
Restart the P8 Radio module
CONFIG Button
Pressing it alone is not defined. Press and hold the
CONFIG and RESET Key at the same time. Release the
RESET key first, and then release the CONFIG key to
enter the configuration state.
Power Requirement
We recommend that you use a 3S-12S battery to power the P8. Both the sky end and
the ground end need independent power supply, please ensure that the maximum
output current of the power supply is> 2.5A (battery is recommended).
* Note: Do not use computers or power bank with output current lower than 2A to
supply power to the equipment; Otherwise, it may lead to irreversible damage to the
equipment.
Default Configuration
The default configuration of P8 is: airspeed 115K, interface speed 57600, broadcast
